Hi all
Tyre pressure readings are handy to have, and Torque makes it easy to set them up. On older versions of the app you'd need to add your own PIDs and figure out the calculations, but the current version (since 1.8.150) has these built-in.
Go to Settings -> Manage extra PIDs/Sensors
Tap the menu and select "Add predefined set"
Select Ford and you'll get a bunch of new PIDs in the list.
Exit out of that and go to Realtime Information to add the tyre pressure gauges to the Dashboard.
Scroll through the list and add:
[FORD]Left front Tyre pressure
[FORD]Left rear Tyre pressure
[FORD]Right front Tyre pressure
[FORD]Right front Tyre pressure
I've been using Small Digital Gauges, with high/low warnings set above and below my road/sand pressures respectively.
You may want to verify the tyre positions by adjusting pressure on each tyre and checking which gauge reflects the change.
If there's any interest I can put together a Ranger PID list to import rather than having to scroll through all the generic [FORD] items.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Torque TPMS
- rjbarrington
- Donator
- Posts: 107
- Joined: Sun May 21, 2017 8:51 pm
- Location: Wellington, New Zealand
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 30 times
- Been thanked: 11 times
2015 PX2 Wildtrak, Cool White: Alpha GSE canopy, EGR flares, Ray's FDX F6 rims, 285/70R17 C General Grabber AT3, DBA T3 discs + XP pads, Öhlins, front camera, auto-fold mirrors, OBDLink MX. Sync3, Focal speakers, Redarc Elite v3, Lightforce Facia.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Great job Richard. Keep an eye out in the SG, UG and PID forums as I will be adding some new PIDS for you to try out. You will have to sort the maths for now.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- rjbarrington
- Donator
- Posts: 107
- Joined: Sun May 21, 2017 8:51 pm
- Location: Wellington, New Zealand
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 30 times
- Been thanked: 11 times
Pic for reference...
Sent from my SM-A320Y using Tapatalk
Sent from my SM-A320Y using Tapatalk
2015 PX2 Wildtrak, Cool White: Alpha GSE canopy, EGR flares, Ray's FDX F6 rims, 285/70R17 C General Grabber AT3, DBA T3 discs + XP pads, Öhlins, front camera, auto-fold mirrors, OBDLink MX. Sync3, Focal speakers, Redarc Elite v3, Lightforce Facia.
- Sports
- Donator
- Posts: 57
- Joined: Mon May 22, 2017 8:20 am
- Location: FNQ
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 24 times
- Been thanked: 10 times
I didn't think pitch and roll were active atm?
Mick
17 PX2 XLT Supercab Manual, Sync3, 2" Lift,Summit Bullbar, Fyrlyt 5000's, ARB 140l Tank, Versus Creed 17x8.5, 285x70x17 KM2, Safari Snorkel, Black Duck Seat Covers, Ozki Canvas Sliding Canopy, Steel Tray, Tint, XRS 370c,100L Water,
17 PX2 XLT Supercab Manual, Sync3, 2" Lift,Summit Bullbar, Fyrlyt 5000's, ARB 140l Tank, Versus Creed 17x8.5, 285x70x17 KM2, Safari Snorkel, Black Duck Seat Covers, Ozki Canvas Sliding Canopy, Steel Tray, Tint, XRS 370c,100L Water,
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
- Sports
- Donator
- Posts: 57
- Joined: Mon May 22, 2017 8:20 am
- Location: FNQ
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 24 times
- Been thanked: 10 times
Ahh ok, I did wonder cause you have only just got the module? from China
Mick
17 PX2 XLT Supercab Manual, Sync3, 2" Lift,Summit Bullbar, Fyrlyt 5000's, ARB 140l Tank, Versus Creed 17x8.5, 285x70x17 KM2, Safari Snorkel, Black Duck Seat Covers, Ozki Canvas Sliding Canopy, Steel Tray, Tint, XRS 370c,100L Water,
17 PX2 XLT Supercab Manual, Sync3, 2" Lift,Summit Bullbar, Fyrlyt 5000's, ARB 140l Tank, Versus Creed 17x8.5, 285x70x17 KM2, Safari Snorkel, Black Duck Seat Covers, Ozki Canvas Sliding Canopy, Steel Tray, Tint, XRS 370c,100L Water,
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I have never found one that is as thorough. Use Forscan for iPhone for reading information. I think it has a dash too.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- bugzila
- Junior Member
- Posts: 30
- Joined: Sat May 27, 2017 11:17 am
- Location: BKK
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2015
- Has thanked: 12 times
- Been thanked: 4 times
Anyone knows for Fomoco TPMS Valve Sensor part no for Everest 2015?
Can support with below part no with 433MHz?
EV6T-1A150-CB
EV6T-1A180-CB
EV6T-1A180-DB
EV6T-1A180-DC
Can support with below part no with 433MHz?
EV6T-1A150-CB
EV6T-1A180-CB
EV6T-1A180-DB
EV6T-1A180-DC
Everest 2015 Ti, Forscan addict.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
EV6T-1A180-CB
EV6T-1A180-DB
EV6T-1A180-DC
CB, DB, and DC should just be revision numbers so EV6T-1A180 should be what you need.
Also I think you have a Thai local model? So TPMS will have to be enable and sensors programmed to vehicle before they will work.
EV6T-1A180-DB
EV6T-1A180-DC
CB, DB, and DC should just be revision numbers so EV6T-1A180 should be what you need.
Also I think you have a Thai local model? So TPMS will have to be enable and sensors programmed to vehicle before they will work.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- Spook
- Donator
- Posts: 12
- Joined: Sat Jun 17, 2017 2:39 pm
- Location: MNC, NSW, Australia
- Model Of Vehicle: OTHER
- Year Of Vehicle: 2022
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
Thanks for those PIDs. Handy addition.
These work on my cheapie bluetooth ELM as well as the MX.
These work on my cheapie bluetooth ELM as well as the MX.
Spook
Current:
2022 Metro Grey V6 XLT.
Previous:
2016 PX2 XLT Dual Cab - Auto, White - No Mods
2013 PX XL Dual Cab - Auto, Silver, ARB Winch Bar, TJM Rear, 2 Inch OME Lift
Current:
2022 Metro Grey V6 XLT.
Previous:
2016 PX2 XLT Dual Cab - Auto, White - No Mods
2013 PX XL Dual Cab - Auto, Silver, ARB Winch Bar, TJM Rear, 2 Inch OME Lift
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Keep an eye on the OBDLink software section as the PIDS I put there should work with Torque too.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- bugzila
- Junior Member
- Posts: 30
- Joined: Sat May 27, 2017 11:17 am
- Location: BKK
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2015
- Has thanked: 12 times
- Been thanked: 4 times
Good news, I have done to enable TPMS on Everest 2.2 2015 with part no EV6T-1A180-DB also activation by VXSCAN.
Everest 2015 Ti, Forscan addict.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Well done.
Enjoy.
Enjoy.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 97
- Joined: Mon Jun 26, 2017 9:33 pm
- Location: Gold Coast QLD
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Has thanked: 1 time
- Been thanked: 4 times
legend this is gold
Greg
2016 PX2 XLT Dual cab 4x4
Sync 3 Auto
2016 PX2 XLT Dual cab 4x4
Sync 3 Auto
-
- Junior Member
- Posts: 97
- Joined: Mon Jun 26, 2017 9:33 pm
- Location: Gold Coast QLD
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Has thanked: 1 time
- Been thanked: 4 times
Different part numbers to the Ranger ones?
I need a full set for second set of wheels, will that TPMS19 work for the 2016/17 models?
sent email to Ford for part numbers but nothing back yet.
cheers
Greg
2016 PX2 XLT Dual cab 4x4
Sync 3 Auto
2016 PX2 XLT Dual cab 4x4
Sync 3 Auto
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Same. It's the same system in both vehicles.
Just go in they know what they are and sell them by the bucket load.
Just go in they know what they are and sell them by the bucket load.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 97
- Joined: Mon Jun 26, 2017 9:33 pm
- Location: Gold Coast QLD
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Has thanked: 1 time
- Been thanked: 4 times
rjbarrington wrote: ↑Sun May 28, 2017 10:51 pm Hi all
Tyre pressure readings are handy to have, and Torque makes it easy to set them up. On older versions of the app you'd need to add your own PIDs and figure out the calculations, but the current version (since 1.8.150) has these built-in.
Go to Settings -> Manage extra PIDs/Sensors
Tap the menu and select "Add predefined set"
Select Ford and you'll get a bunch of new PIDs in the list.
Exit out of that and go to Realtime Information to add the tyre pressure gauges to the Dashboard.
Scroll through the list and add:
[FORD]Left front Tyre pressure
[FORD]Left rear Tyre pressure
[FORD]Right front Tyre pressure
[FORD]Right front Tyre pressure
I've been using Small Digital Gauges, with high/low warnings set above and below my road/sand pressures respectively.
You may want to verify the tyre positions by adjusting pressure on each tyre and checking which gauge reflects the change.
If there's any interest I can put together a Ranger PID list to import rather than having to scroll through all the generic [FORD] items.
not working on latest Torque lite, is this pro only?
i only get GM/Opel/Vauxhall no FORD option?
Greg
2016 PX2 XLT Dual cab 4x4
Sync 3 Auto
2016 PX2 XLT Dual cab 4x4
Sync 3 Auto
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Probably Pro only. But you could email the developer.
If it is something that you want just pay the $5, it's pocket change for the time that the developer has put in.
Or if you have the OBDlink then use their software as the license is included free of charge.
If it is something that you want just pay the $5, it's pocket change for the time that the developer has put in.
Or if you have the OBDlink then use their software as the license is included free of charge.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 97
- Joined: Mon Jun 26, 2017 9:33 pm
- Location: Gold Coast QLD
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Has thanked: 1 time
- Been thanked: 4 times
yeah setup pid on OBDlink that you generously supplied just need to test it.
would the same Pids formula work in Torqe, still comparing the 2 apps to work out which one I will stick with
would the same Pids formula work in Torqe, still comparing the 2 apps to work out which one I will stick with
Greg
2016 PX2 XLT Dual cab 4x4
Sync 3 Auto
2016 PX2 XLT Dual cab 4x4
Sync 3 Auto
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Yes.subzero747 wrote: ↑Mon Nov 06, 2017 8:09 pm yeah setup pid on OBDlink that you generously supplied just need to test it.
would the same Pids formula work in Torqe, still comparing the 2 apps to work out which one I will stick with
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 2
- Joined: Thu Dec 27, 2018 9:13 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: ELM327 Bluetooth
I have added these PIDs in torque and they aren't receiving any information for some reason. Pretty well every other Ford specific PID works though, any ideas? Cheers for any assistance.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Possibly the dongle you are using.
Post screen shots of one of the custom PID tons sensors you have added.
Post screen shots of one of the custom PID tons sensors you have added.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic