as all my lift kits are finally here im going on with 37x13.5x20
The problem is, that Croatian law mandates the speedo to be at least 1% below actual speed...
I already changed to maxed value via forscan for 33s...
What are my options here?
Wildtrak 2018 3.2 auto
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
37s and speedo
-
- Donator
- Posts: 32
- Joined: Wed Jun 27, 2018 12:27 am
- Location: Croatia
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: ELM327 with switch
- Has thanked: 3 times
- Been thanked: 1 time
Fuel 20" -43
Toyos MT 37s
110 mm fenders
OME 2" lift
O4WD 4" lift
O4WD Steel bumper front and back
O4WD rollbar with roofrack
Mustang xenon headlights
LED taillights
50" lightbar
Winch
Stage1 mapping
Toyos MT 37s
110 mm fenders
OME 2" lift
O4WD 4" lift
O4WD Steel bumper front and back
O4WD rollbar with roofrack
Mustang xenon headlights
LED taillights
50" lightbar
Winch
Stage1 mapping
-
- Donator
- Posts: 159
- Joined: Mon Apr 22, 2019 12:02 am
- Location: Canberra
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 14 times
- Been thanked: 39 times
Firstly, have a read of this long running thread - https://www.saeb.net/viewtopic.php?f=12&t=214
The transmission computer (TCM) will probably need to be updated otherwise it won't behave very nicely. However, I don't know if the TCM can be changed enough to support 37".
Do Arctic Trucks in Iceland play with Ford Rangers? 37" would be a small tyre for them.
Start with the thread above.
The transmission computer (TCM) will probably need to be updated otherwise it won't behave very nicely. However, I don't know if the TCM can be changed enough to support 37".
Do Arctic Trucks in Iceland play with Ford Rangers? 37" would be a small tyre for them.
Start with the thread above.
Ian B
PX3 XLT 3.2
PX3 XLT 3.2
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Maybe send it over then yes I can fix it 100%.
Being I'm not going to Croatia this week then you maybe have to look toward BPT Motorsport and get Barry to make appropiate changes to a TCM file and send a unit over.
Being I'm not going to Croatia this week then you maybe have to look toward BPT Motorsport and get Barry to make appropiate changes to a TCM file and send a unit over.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 34
- Joined: Thu May 31, 2018 3:32 pm
- Location: Sydney
- Model Of Vehicle: MAZDA BT50
- Year Of Vehicle: 2015
- Has thanked: 3 times
- Been thanked: 7 times
Hi Saeb,
can you help to a PX1 as well?
I don't need to get to 37 (35 would be nice) but you might remember that I had raised the question already in the past.
I can not not see any option in Forescan when connected to my2016 (PX1 equivalent) BT50
Cheers
Mike
Me Too
BT50
2"lift
Dobinson MRR
Federal MT 265/75 R16
Rocksliders
BT50
2"lift
Dobinson MRR
Federal MT 265/75 R16
Rocksliders
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
You will not do it to a PX1, options are hardcoded in the BCM and cannot be changed.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 34
- Joined: Thu May 31, 2018 3:32 pm
- Location: Sydney
- Model Of Vehicle: MAZDA BT50
- Year Of Vehicle: 2015
- Has thanked: 3 times
- Been thanked: 7 times
Thanks Stewart for clarifying.
So back to the old-fashion mechanical adjustments for the engineering certificate
And I assume changing over to a newer BCM would probably open a can of worms in terms of compatibility issues?
Cheers
Mike
So back to the old-fashion mechanical adjustments for the engineering certificate
And I assume changing over to a newer BCM would probably open a can of worms in terms of compatibility issues?
Cheers
Mike
Me Too
BT50
2"lift
Dobinson MRR
Federal MT 265/75 R16
Rocksliders
BT50
2"lift
Dobinson MRR
Federal MT 265/75 R16
Rocksliders
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Nothing newer even in a current BT50 will help you. PX2 electronic components are not compatible with a PX1 at all so unfortunatly your out of luck.
You could dissasemble the cluster and move the speedo needle back about 15km, not sure if they would say anything but at least it would be closer to 100, 100.
You could dissasemble the cluster and move the speedo needle back about 15km, not sure if they would say anything but at least it would be closer to 100, 100.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic