Im trying to get my auto trans temp working in the torque app. Any idea what the PID is for the auto trans temp.
Any help would be much appreciated.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Auto Trans Temp
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Try this.
PID: 221E1C
Min Value: 0
Max Value: 200
Equation ((A*256)+B)*5/72-17
Header 07E1
Use PID calculator in the first post here viewtopic.php?t=2667
PID: 221E1C
Min Value: 0
Max Value: 200
Equation ((A*256)+B)*5/72-17
Header 07E1
Use PID calculator in the first post here viewtopic.php?t=2667
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 5
- Joined: Fri Jun 30, 2017 12:49 am
- Location: Perth WA
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
I put that code into my torque app on my phone. Works a treat.
Then I put it into my torque app on my Samsung tablet and it doesn't work it reads -34.7. I have checked to make sure all the settings are the same on both my tablet and phone. Also al the other gauges like boost, tpms, coolant etc are working perfectly just a problem with the auto trans.
I have also restarted the tablet a couple of times.
Any ideas why?
Then I put it into my torque app on my Samsung tablet and it doesn't work it reads -34.7. I have checked to make sure all the settings are the same on both my tablet and phone. Also al the other gauges like boost, tpms, coolant etc are working perfectly just a problem with the auto trans.
I have also restarted the tablet a couple of times.
Any ideas why?
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
No reason why not. Check the header and if need be pm screen shots from both devices.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
I'm getting the -34.7 on Torque app on my S7.
The same config in OBD Link app works perfect. :/
The same config in OBD Link app works perfect. :/
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Because Torque is probably set to use degrees Fahrenheit not degrees centigrade.HiroboFreak wrote: ↑Fri Aug 25, 2017 8:15 am I'm getting the -34.7 on Torque app on my S7.
The same config in OBD Link app works perfect. :/
I based the maths on degrees centigrade.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
No that's the first thing I checked
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Try 2 things.
I assume you are looking at a gauge not just the output from the math?
Is the gauge not the canbus output showing the correct temp when changed degrees Fahrenheit instead?
I will test it again over the weekend.
I assume you are looking at a gauge not just the output from the math?
Is the gauge not the canbus output showing the correct temp when changed degrees Fahrenheit instead?
I will test it again over the weekend.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Gauge displays incorrectly also.
I don't think it's your equation because it works in OBD link.
I have emailed the Torque dev.
Sent from my SM-G930F using Tapatalk
I don't think it's your equation because it works in OBD link.
I have emailed the Torque dev.
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Pretty sure my degrees Fahrenheit maths were ((A*256)+B)/8 so make another custom PID with that and play with your settings and see what happens.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Just tried new config, displays -32.1
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Ok just tried both of these. One is Fahrenheit and one is Celcius. With units set to Celcius both work and give correct results. The Celcius one could probably changed to -18 though.
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Must be my phone then. Samsung S7.
The OP had the same issue with a Samsung tablet.
Sent from my SM-G930F using Tapatalk
The OP had the same issue with a Samsung tablet.
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Is there any way this could have affected Sync Ambient temp display?
The reason I ask is because Sync appears to be stuck on 9°
Sent from my SM-G930F using Tapatalk
The reason I ask is because Sync appears to be stuck on 9°
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I did that test on a Samsung S7 so there is another issue.
You mean Sync on the 8inch display? Totally separate module and address so no. Try doing an APIM reset in Forscan.
You mean Sync on the 8inch display? Totally separate module and address so no. Try doing an APIM reset in Forscan.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Also do not run more than one scantool at a time as they can conflict.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Reset didn't solve.
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Ok it came good after a 10 minute drive.
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Twobitz did you ever resolve this?Twobitz wrote: ↑Fri Jul 07, 2017 7:37 pm I put that code into my torque app on my phone. Works a treat.
Then I put it into my torque app on my Samsung tablet and it doesn't work it reads -34.7. I have checked to make sure all the settings are the same on both my tablet and phone. Also al the other gauges like boost, tpms, coolant etc are working perfectly just a problem with the auto trans.
I have also restarted the tablet a couple of times.
Any ideas why?
I'm having the same problem on my S7.
Dennis - 2016 Everest Titanium
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Yeah I have no idea wtf is going on.
It works with OBD link, but not Torque.
*Sometimes* the "test" shows the correct temp, but then when I add the gauge it's wrong, then I check the test again and it's wrong.
Sent from my SM-G930F using Tapatalk
It works with OBD link, but not Torque.
*Sometimes* the "test" shows the correct temp, but then when I add the gauge it's wrong, then I check the test again and it's wrong.
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
So I found out that after you add the TFT gauge, you need to exit the app, then go back in again.
Minor bug.
Sent from my SM-G930F using Tapatalk
Minor bug.
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
-
- Junior Member
- Posts: 7
- Joined: Wed Aug 16, 2017 2:00 pm
- Location: Melbourne
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2015
- Has thanked: 3 times
I got the TransTemp guage working a couple of days ago, but dont think it is displaying Temp correctly, before I started my vehicle this morning after letting it sit all night (arrived home 4pm, started 7am so 15 hours off) and noted that transtemp was -7 and engine temp was +7 degrees Celcius. By the time I arrived on site the trans temp was +85 and engine +88 degrees Celcius. My trans does take a while to warm properly as I have a cooler and taken the water/transfluid heat exchanger out.
Almost Stock Everet Titanium, working on more mods as time allows.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
It is spot on. Ignore the minus. My ultragauge will also do it but it still matches IDS scan tool after 5 degrees I think it was. It's to do with how the calcs are done on ultragauge or Scangauge. You cannot do maths as complex on these devices compared to Torque or OBDlink. Also software devices support setting a minimum which is usually 0.
Your temp are roughly the same as mine.
Your temp are roughly the same as mine.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic