Hi
I am seriously considering upgrading my sync 1 (4" screen) to the newer Sync 3. I have done ALOT of homework and was wondering if anyone has attempted this successfully? I have a 2018 XLS Supercab. My method would be to pull a Sync 3 system AC controls, Screen, usb hub and APIM from a wrcked xlt or wildtrak. Main question I have is regarding the wiring loom. I can either buy one from ebay ( at a premium ) or I can cut off the Sync 3 plug from the donor car and splice my own.
Does anybody have knowledge of the wiiring for the upgrade?
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Sync 1 (4" Screen) to Sync 3 upgrade
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Easier to use loom, it is not worth doing it the other way. I have one left if interested.barendvdw wrote: ↑Tue Mar 22, 2022 7:48 am Hi
I am seriously considering upgrading my sync 1 (4" screen) to the newer Sync 3. I have done ALOT of homework and was wondering if anyone has attempted this successfully? I have a 2018 XLS Supercab. My method would be to pull a Sync 3 system AC controls, Screen, usb hub and APIM from a wrcked xlt or wildtrak. Main question I have is regarding the wiring loom. I can either buy one from ebay ( at a premium ) or I can cut off the Sync 3 plug from the donor car and splice my own.
Does anybody have knowledge of the wiiring for the upgrade?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic