Yes, correct.Pasparakis wrote: ↑Sat May 06, 2023 8:31 am The better value in my case is 0977?
Here BCM 726-12-01 xxxx-XXXX-xx ?
Sent from my iPhone using Tapatalk
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Tyre sizes - Including asbuilt Calculator
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- Pasparakis
- Junior Member
- Posts: 13
- Joined: Wed Oct 20, 2021 4:00 am
- Location: Greece
- Model Of Vehicle: RANGER WILDTRAK PX3
- Year Of Vehicle: 2021
- Forscan Dongle Type: Other
My car is 10speed automatic…is right value 0977?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Pasparakis
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Use 09DC then and read ALL the instructions.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- Pasparakis
- Junior Member
- Posts: 13
- Joined: Wed Oct 20, 2021 4:00 am
- Location: Greece
- Model Of Vehicle: RANGER WILDTRAK PX3
- Year Of Vehicle: 2021
- Forscan Dongle Type: Other
With 09DC I have problems to auto parking..the wheel goes to pavement..
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Pasparakis
-
- New Member
- Posts: 2
- Joined: Thu Sep 15, 2022 1:24 pm
- Location: Adelaide
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2021
- Forscan Dongle Type: ELM327 with switch
- Has thanked: 2 times
I`ve had 275/65/r18 on the10 speed biturbo for 12,000 k`s now, originals wre 265/60/ r18,; I wasn`t happy with the way the car was running, came here and used the tyre calculator and followed the instuctions- all good now - way better economy and trans is way better also.
Thanks so much for your efforts on this site
Thanks so much for your efforts on this site
I`m retired and drive a stock 21.25 bi-turbo everest trend 10 speed (used for towing a 2 tonne caravan and 4wdriving)
-
- New Member
- Posts: 3
- Joined: Sat Aug 19, 2023 6:24 am
- Location: Gold Coast
- Model Of Vehicle: NEXTGEN EK EVEREST
- Year Of Vehicle: 2022
Hi all, I have a Next-Gen Everst Sport V6 with 275/65R18's.
True Circumference mm: 2559
Ford Corrected Circumference mm: 2475
Required BCM value at 726-12-01 is xxxx-09AB-xxxx
I updated this value under bcm asbuilt and did theTCM relearn but keep getting numerous error codes.
I reset this to default and cleared the error codes.
I tried changing the tyre circumference under bcm non asbuilt but got more error codes, the service message and a check 4x4 message.
I reset this to default and cleared the error codes.
I know 0977 is the max value on the 6 speed but read that I should use the value shown in the calculator for the 10 speed.
Am I missing something Stewart?
True Circumference mm: 2559
Ford Corrected Circumference mm: 2475
Required BCM value at 726-12-01 is xxxx-09AB-xxxx
I updated this value under bcm asbuilt and did theTCM relearn but keep getting numerous error codes.
I reset this to default and cleared the error codes.
I tried changing the tyre circumference under bcm non asbuilt but got more error codes, the service message and a check 4x4 message.
I reset this to default and cleared the error codes.
I know 0977 is the max value on the 6 speed but read that I should use the value shown in the calculator for the 10 speed.
Am I missing something Stewart?
Last edited by Humbie on Fri Sep 01, 2023 6:55 am, edited 1 time in total.
2022 Next-Gen Everest Sport, 2" Llift, Bullbar
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Yes.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 3
- Joined: Sat Aug 19, 2023 6:24 am
- Location: Gold Coast
- Model Of Vehicle: NEXTGEN EK EVEREST
- Year Of Vehicle: 2022
Was your BCM value at 726-12-01 xxxx-09AB-xxxx?toochie wrote: ↑Mon Aug 21, 2023 6:15 pm I`ve had 275/65/r18 on the10 speed biturbo for 12,000 k`s now, originals wre 265/60/ r18,; I wasn`t happy with the way the car was running, came here and used the tyre calculator and followed the instuctions- all good now - way better economy and trans is way better also.
Thanks so much for your efforts on this site
2022 Next-Gen Everest Sport, 2" Llift, Bullbar
-
- New Member
- Posts: 4
- Joined: Fri Sep 15, 2023 11:54 am
- Location: Melbourne
- Model Of Vehicle: NEXTGEN EK EVEREST
- Year Of Vehicle: 2023
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 1 time
If the numbers are all correct and the speedo is still showing 100km/h when GPS shows 96km/h can i correct this another way?
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
No. Speedometer cannot be independently changed and the 4% is written in the firmware.jabbawingo wrote: ↑Fri Sep 22, 2023 12:03 pm If the numbers are all correct and the speedo is still showing 100km/h when GPS shows 96km/h can i correct this another way?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 4
- Joined: Fri Sep 15, 2023 11:54 am
- Location: Melbourne
- Model Of Vehicle: NEXTGEN EK EVEREST
- Year Of Vehicle: 2023
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 1 time
bummer! thanks thoughsaeb wrote: ↑Fri Sep 22, 2023 12:06 pmNo. Speedometer cannot be independently changed and the 4% is written in the firmware.jabbawingo wrote: ↑Fri Sep 22, 2023 12:03 pm If the numbers are all correct and the speedo is still showing 100km/h when GPS shows 96km/h can i correct this another way?
- GerryP
- Moderator
- Posts: 514
- Joined: Sun May 21, 2017 8:17 pm
- Location: Karoonda SA
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 58 times
- Been thanked: 82 times
If you read the speed via the OBD port using a Scangauge or similar, you'll see the speed without the 4% factor. If your tyre size settings are correct then that should correspond with your GPS.
Gerry
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
-
- Junior Member
- Posts: 31
- Joined: Wed Mar 06, 2019 8:41 pm
- Location: Sydney
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2018
- Forscan Dongle Type: ELM327
- Has thanked: 8 times
- Been thanked: 2 times
Hi Stewart,
Just confirming we only Make required changes in BCM asbuilt ?
My Required BCM value at 726-12-01 is --- xxxx-09DC-xxxx for the 285/70r/17 wheels and Tyres.
Do i need to change the original Tyre Circumference from 2340mm to 2610mm too?
I have a PX3 BiTurbo 10 Speed.
cheers
Pete
Just confirming we only Make required changes in BCM asbuilt ?
My Required BCM value at 726-12-01 is --- xxxx-09DC-xxxx for the 285/70r/17 wheels and Tyres.
Do i need to change the original Tyre Circumference from 2340mm to 2610mm too?
I have a PX3 BiTurbo 10 Speed.
cheers
Pete
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Do exactly as per the instructions.LUMO wrote: ↑Sat Sep 30, 2023 10:13 pm Hi Stewart,
Just confirming we only Make required changes in BCM asbuilt ?
My Required BCM value at 726-12-01 is --- xxxx-09DC-xxxx for the 285/70r/17 wheels and Tyres.
Do i need to change the original Tyre Circumference from 2340mm to 2610mm too?
I have a PX3 BiTurbo 10 Speed.
cheers
Pete
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 31
- Joined: Wed Mar 06, 2019 8:41 pm
- Location: Sydney
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2018
- Forscan Dongle Type: ELM327
- Has thanked: 8 times
- Been thanked: 2 times
Done with out changing the tyre circumference and much better now.. gps show 3km/h less than the cluster.
Thanks Stewart..
Thanks Stewart..
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
3 or 4 depending on tread depth is perfect.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 1
- Joined: Wed Oct 11, 2023 9:58 pm
- Location: Sydney
- Model Of Vehicle: NEXTGEN RA RANGER
- Year Of Vehicle: 2023
Can somebody tell me if this works for next gen ranger have fitted up 285 70 17 tyres and want to correct speedo thanks
-
- New Member
- Posts: 1
- Joined: Fri Jan 19, 2024 5:17 pm
- Location: Toolamba
- Model Of Vehicle: NEXTGEN RA RANGER
- Year Of Vehicle: 2022
- Forscan Dongle Type: OBDlink LX
22.75 2ltr wildtrack
I changed my BCM value from 725-12-01-C100-4D50-4E20 to 726-12-01 to xxxx-09DC-xxxx for the 285/70r/17 wheels and Tyres.
Click write and it comes up with a check sum error
Ignition off and on
And retrained the TCM.
But the are DTC’s I can’t clear.
I tried three times, go back to standard and the codes clear.
Any ideas what could be causing this?
I also tried change the tyre circumference but it comes up with a transfer error alarm so back to standard
I changed my BCM value from 725-12-01-C100-4D50-4E20 to 726-12-01 to xxxx-09DC-xxxx for the 285/70r/17 wheels and Tyres.
Click write and it comes up with a check sum error
Ignition off and on
And retrained the TCM.
But the are DTC’s I can’t clear.
I tried three times, go back to standard and the codes clear.
Any ideas what could be causing this?
I also tried change the tyre circumference but it comes up with a transfer error alarm so back to standard
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
As per my note on the calculator "This is not applicable to NextGen"
22.75 would be a NextGen so......................................................
22.75 would be a NextGen so......................................................
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic