Hi how's it going guys? How can I fix / reset "Pre-collision assist not available" warning? I knocked my right side bumper on a pole and one side of the sensor was sightly pushed inside. I have since had it taken out and straightened the bent out and refitted it all back as per before, and in case the warning still persist, what steps i should consider taking instead of replacing it with a new sensor which will cost me an arm.
Advice appreciated guys.
Cheers.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Pre-collision assist not available
-
- Donator
- Posts: 235
- Joined: Tue Nov 07, 2017 8:46 pm
- Location: Queensand
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2016
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 18 times
- Been thanked: 28 times
There is a procedure to adjust the module and a Calibration that can be done in Forscan. Have a look at these two threads for info. The second one has instructions for adjustment. If you do a search for CCM there are more threads.
https://www.saeb.net/viewtopic.php?f=12 ... CCM#p14213
https://www.saeb.net/viewtopic.php?f=12 ... CCM#p13709
https://www.saeb.net/viewtopic.php?f=12 ... CCM#p14213
https://www.saeb.net/viewtopic.php?f=12 ... CCM#p13709
2016 XLT 4x4 Space cab, Aluminium Tray, Ford Steel Bull bar. Rear bumper bar fitted for parking sensors.