Not sure if this can be got at, but is it possible at all to remove the torque limits on the Manuals?
for example on the PX Mk2 1st gear is limited to 350Nm, 2nd & 3rd 400Nm and 4th-6th get the full 470Nm. I'd like to remove the limits so it will actually pull in 2nd gear.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Torque Limit removal on Manuals
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Talk to Barry at BPT Motorsports https://www.bptmotorsport.com.au/
He should be able to change this with a PCM tune and you can flash it yourself.
Tell him you have been sent by these forums.
He should be able to change this with a PCM tune and you can flash it yourself.
Tell him you have been sent by these forums.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic