Ranger Mods

Hi Guys
New here but could not find the Diagnostic codes that will be shown on the scan gauge .
I have just installed the gauge and if a fault should ever occur and I retrieve the fault code it would be good to know if the problem was major or minor particularly if I was remote .
If minor could I just reset .
Thanks
Jeff

There is no list of codes to my knowledge.
If you want to know what the code is then Google it will be the best.

Thanks for your response.
Google is good but as long as you have reception.
My Ford dealer was most unhelpful . Your answer is as I suspected the codes are not in the public domain.
I was hoping that I would be able to turn off potential limp mode codes and store them until I good get to a main town.
Thanks
Jeff

Try this one, it's a pdf so you can print it and keep it in the glove box.

https://www.google.com.au/url?sa=t&sour ... 117902012

Thanks Gerry
I have spent a lot of time chasing these ,they hopefully not be required.
Jeff

GerryP wrote: ↑Sat Feb 08, 2020 10:31 am Try this one, it's a pdf so you can print it and keep it in the glove box.

https://www.google.com.au/url?sa=t&sour ... 117902012

That's a good thing to have Gerry, thanks.