Am I able to add reversing sensors to my XL and have them functioning as per factory ones? Does anyone know what is involved and what parts are required?
Thanks in advance.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Adding Reversing sensors to an XL
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I'm sure you could although I doubt you would have the loom to support it in a 2015 XL which would mean running everything back to the BCM.
Loom and sensors I would base on an XLT, so grab an XLT vin and price the rear loom and sensors off Ford. Expect maybe $400-$500 plus...
The BCM will support it and your 4ich display will also support it so I can supply all the changes and pin outs to the BCM. It will just come down to how much time and effort you want to spend on the project.
Thanks for the files I will be looking at them and others over the weekend.
Loom and sensors I would base on an XLT, so grab an XLT vin and price the rear loom and sensors off Ford. Expect maybe $400-$500 plus...
The BCM will support it and your 4ich display will also support it so I can supply all the changes and pin outs to the BCM. It will just come down to how much time and effort you want to spend on the project.
Thanks for the files I will be looking at them and others over the weekend.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic