Hi guys,
Is it possible to turn on or retrofit Active Noise Cancelling in a PX3 XLS?
My search tells me people switch them off from putting AMPS in.
However, after driving an Everest I noticed a significant difference in engine/road noise and can only put it down to ANC.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Active Noise Cancelling
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
2.0 or 3.2?
3.2 no, engine vibrations do not work well with it hence why they never had it.
2.0 should work but ACM will need to be replaced and the 3 microphones installed and wired in XLS and being there is less insulation it will still be an unknown to if it will work quiet as well.
ANC is tuned for the environment it is installed in.
3.2 no, engine vibrations do not work well with it hence why they never had it.
2.0 should work but ACM will need to be replaced and the 3 microphones installed and wired in XLS and being there is less insulation it will still be an unknown to if it will work quiet as well.
ANC is tuned for the environment it is installed in.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
TieNN89
- Donator
- Posts: 78
- Joined: Fri Jan 03, 2020 11:49 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 1 time
- Been thanked: 8 times
3.2L
The Everest I had was also a 3.2L as well.
Sounds like a bit of work
The Everest I had was also a 3.2L as well.
Sounds like a bit of work
Ranger XLS PX3 MY19.75