Just got a PX3 XLT with 25w HID low beam and Halogen high beam. Looking to improve the high beams before I add a Stedi light bar later on. Prefer a warmer 4500k colour instead of the white 6000k colour, hence choosing HID over LED.
Any issues or suggestions around replacing the factory high beam halogen globes with a HID kit? I think they're HB3 9005 fitting.
Stedi do a 35w Xenon HID kit, but they're D1S D3S or D5S. Not familiar with those standards.
Not finding anything else that looks like it will fit within the factory light enclosure that would work & allow the sealed cap to screw back on at the rear.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
PX3 XLT - Replace halogen hi beams with HID kit?
-
- Donator
- Posts: 6
- Joined: Mon Jul 03, 2023 9:54 am
- Location: Australia
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2018
- Forscan Dongle Type: ELM327
2018 PX3 XLT Dual Cab, auto 3.2l
- kfa1950
- Donator
- Posts: 86
- Joined: Wed Oct 18, 2017 6:58 am
- Location: FORSTER NSW
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Been thanked: 19 times
If you are going to use HID, use a relay so as not to harm the BCM.
2017 XLT, nGauge, Canopy, Solar Panel, Dobinson Bullbar, Long Range Fuel Tank, Redarc DC2DC & Pro Elite Brake Controller, HID Globes & Driving Lights, Lightbar.