Hi guys I wonder if you could help me with a solution to a problem
I’ve got a 2018 uk ford ranger wildtrak. It’s got the two usb plugs and no 3.5mm jack.
I’d like to add a 3.5mm jack to the vehicle so I can audio through the speakers without a delay like there is on the Bluetooth. The lag on that is so annoying to me.
I’ve considered fm transmitters but I don’t like them and they’re not reliable. I’d prefer a more Hardwired option even if it means wiring into the 54pin plug on the sync module.
I’ve seen products online but they seem to be £250 or so which seems expensive?
Thanks guys
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Sync 3 wiring help
-
- New Member
- Posts: 3
- Joined: Fri Dec 21, 2018 12:35 pm
- Location: Uk
- Model Of Vehicle: RANGER WILDTRAK PX3
- Year Of Vehicle: 2018
- Forscan Dongle Type: Ford VCM
- Has thanked: 1 time
It’s not a phone I’m connecting. It’s a hdmi source for a special/law enforcement vehicle
Uk ford ranger wildtrak. Cooper at3 4s tyres 265 70/18s. Auxiliary reverse lights and updated headlights
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
This is about the only working option for 3.5mm to USB. There is no other hardwired option unless you were to ad an amplifier.
https://naviks.com/i-24076199-ford-sync ... apter.html
https://naviks.com/i-24076199-ford-sync ... apter.html
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic