Hi guys!
I am finding the way to add Center Speaker for my Ford Ranger wildtrak model 2017, Do anyone have ideas for wiring an audio signal to this center speaker? Is it necessary to enable the hidden feature for the center speaker function with the forscan software? thankyou ^^
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
How to add Center Speaker for Ford Ranger SYNC3
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Unsure if the wiring is even there for a Ranger. If not then pigtails will also need to be added to the ACM plug so it can be wired in.
Forscan changes will also be required to activate.
I have info on both but need to find some spare time to pull wiring and asbuilt to post.
Forscan changes will also be required to activate.
I have info on both but need to find some spare time to pull wiring and asbuilt to post.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- barendvdw
- Junior Member
- Posts: 6
- Joined: Tue Mar 22, 2022 7:10 am
- Location: South Africa
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink LX
I have undertaken the same. Added pins to no 8 & 20 on ACM harness.
Changed 727-01-01 xxx* xxxx to 9
Not working currently. Any suggestions?
Changed 727-01-01 xxx* xxxx to 9
Not working currently. Any suggestions?
2018 Ranger Supercab XLS 2.2 Auto
-
- Donator
- Posts: 159
- Joined: Mon Apr 22, 2019 12:02 am
- Location: Canberra
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 14 times
- Been thanked: 39 times
My collected internet info says setting 727-01-01 xxx* xxxx xxxx to 9 means you're activating the AUX2 speaker cct (and AUX1 will go to an external sub). Do pins 8&20 correspond to AUX2?
Then you need to set 727-01-01 xxxx xx*x xxxx to 4 to let the headunit know that AUX2 is located at center front.
The settings for 727-01-01 xxx* xxxx xxxx I have are:
0=Aux1 not used & Aux2 not used 8=Aux1 External Sub & Aux2 not used
1=Aux1 not used & Aux2 Internal Amp 9=Aux1 External Sub & Aux2 Internal Amp
2=Aux1 not used & Aux2 External Sub A=Aux1 External Sub & Aux2 External Sub
3=Aux1 not used & Aux2 External Speaker B=Aux1 External Sub & Aux2 External Speaker
4=Aux1 reserved & Aux2 not used C=Aux1 External Speaker & Aux2 not used
5=Aux1 reserved & Aux2 Internal Amp D=Aux1 External Speaker & Aux2 Internal Amp
6=Aux1 reserved & Aux2 External Sub E=Aux1 External Speaker & Aux2 External Sub
7=Aux1 reserved & Aux2 External Speaker F=Aux1 External Speaker & Aux2 External Speaker
and the settings for 727-01-01 xxxx xx*x xxxx (Channel Location for Balance & Fade) I have are:
0=Mono Subwoofer 8=Right Rear
2=Left Front A=Center Rear
4=Center Front C=Left Rear
6=Right Front E=Right Subwoofer
Might help you progress things a little.
Ian B
PX3 XLT 3.2
PX3 XLT 3.2
- barendvdw
- Junior Member
- Posts: 6
- Joined: Tue Mar 22, 2022 7:10 am
- Location: South Africa
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink LX
Thank you so mutch however my options are a little different:
00=Aux1 Mono Sub, Aux2 Mono Sub, Internal CD Enabled/External CD Disabled, Conversion Disabled
01=Aux1 Mono Sub, Aux2 Mono Sub, Internal CD Enabled/External CD Disabled, Conversion Enabled
02=Aux1 Mono Sub, Aux2 Mono Sub, Internal CD Disabled/External CD/No CD, Conversion Disabled
03=Aux1 Mono Sub, Aux2 Mono Sub, Internal CD Disabled/External CD/No CD, Conversion Enabled
04=Aux1 Mono Sub, Aux2 Left Front, Internal CD Enabled/External CD Disabled, Conversion Disabled
05=Aux1 Mono Sub, Aux2 Left Front, Internal CD Enabled/External CD Disabled, Conversion Enabled
06=Aux1 Mono Sub, Aux2 Left Front, Internal CD Disabled/External CD/No CD, Conversion Disabled
07=Aux1 Mono Sub, Aux2 Left Front, Internal CD Disabled/External CD/No CD, Conversion Enabled
08=Aux1 Mono Sub, Aux2 Center Front, Internal CD Enabled/External CD Disabled, Conversion Disabled
09=Aux1 Mono Sub, Aux2 Center Front, Internal CD Enabled/External CD Disabled, Conversion Enabled
0A=Aux1 Mono Sub, Aux2 Center Front, Internal CD Disabled/External CD/No CD, Conversion Disabled
0B=Aux1 Mono Sub, Aux2 Center Front, Internal CD Disabled/External CD/No CD, Conversion Enabled
0C=Aux1 Mono Sub, Aux2 Right Front, Internal CD Enabled/External CD Disabled, Conversion Disabled
0D=Aux1 Mono Sub, Aux2 Right Front, Internal CD Enabled/External CD Disabled, Conversion Enabled
My options are already set to 08. Which should work. But still nothing. Yes pin 8 and 20 is the AUX 2 pins according to the wiring diagram.
00=Aux1 Mono Sub, Aux2 Mono Sub, Internal CD Enabled/External CD Disabled, Conversion Disabled
01=Aux1 Mono Sub, Aux2 Mono Sub, Internal CD Enabled/External CD Disabled, Conversion Enabled
02=Aux1 Mono Sub, Aux2 Mono Sub, Internal CD Disabled/External CD/No CD, Conversion Disabled
03=Aux1 Mono Sub, Aux2 Mono Sub, Internal CD Disabled/External CD/No CD, Conversion Enabled
04=Aux1 Mono Sub, Aux2 Left Front, Internal CD Enabled/External CD Disabled, Conversion Disabled
05=Aux1 Mono Sub, Aux2 Left Front, Internal CD Enabled/External CD Disabled, Conversion Enabled
06=Aux1 Mono Sub, Aux2 Left Front, Internal CD Disabled/External CD/No CD, Conversion Disabled
07=Aux1 Mono Sub, Aux2 Left Front, Internal CD Disabled/External CD/No CD, Conversion Enabled
08=Aux1 Mono Sub, Aux2 Center Front, Internal CD Enabled/External CD Disabled, Conversion Disabled
09=Aux1 Mono Sub, Aux2 Center Front, Internal CD Enabled/External CD Disabled, Conversion Enabled
0A=Aux1 Mono Sub, Aux2 Center Front, Internal CD Disabled/External CD/No CD, Conversion Disabled
0B=Aux1 Mono Sub, Aux2 Center Front, Internal CD Disabled/External CD/No CD, Conversion Enabled
0C=Aux1 Mono Sub, Aux2 Right Front, Internal CD Enabled/External CD Disabled, Conversion Disabled
0D=Aux1 Mono Sub, Aux2 Right Front, Internal CD Enabled/External CD Disabled, Conversion Enabled
My options are already set to 08. Which should work. But still nothing. Yes pin 8 and 20 is the AUX 2 pins according to the wiring diagram.
2018 Ranger Supercab XLS 2.2 Auto
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
barendvdw wrote: ↑Sat Apr 30, 2022 5:20 am Thank you so mutch however my options are a little different:
00=Aux1 Mono Sub, Aux2 Mono Sub, Internal CD Enabled/External CD Disabled, Conversion Disabled
01=Aux1 Mono Sub, Aux2 Mono Sub, Internal CD Enabled/External CD Disabled, Conversion Enabled
02=Aux1 Mono Sub, Aux2 Mono Sub, Internal CD Disabled/External CD/No CD, Conversion Disabled
03=Aux1 Mono Sub, Aux2 Mono Sub, Internal CD Disabled/External CD/No CD, Conversion Enabled
04=Aux1 Mono Sub, Aux2 Left Front, Internal CD Enabled/External CD Disabled, Conversion Disabled
05=Aux1 Mono Sub, Aux2 Left Front, Internal CD Enabled/External CD Disabled, Conversion Enabled
06=Aux1 Mono Sub, Aux2 Left Front, Internal CD Disabled/External CD/No CD, Conversion Disabled
07=Aux1 Mono Sub, Aux2 Left Front, Internal CD Disabled/External CD/No CD, Conversion Enabled
08=Aux1 Mono Sub, Aux2 Center Front, Internal CD Enabled/External CD Disabled, Conversion Disabled
09=Aux1 Mono Sub, Aux2 Center Front, Internal CD Enabled/External CD Disabled, Conversion Enabled
0A=Aux1 Mono Sub, Aux2 Center Front, Internal CD Disabled/External CD/No CD, Conversion Disabled
0B=Aux1 Mono Sub, Aux2 Center Front, Internal CD Disabled/External CD/No CD, Conversion Enabled
0C=Aux1 Mono Sub, Aux2 Right Front, Internal CD Enabled/External CD Disabled, Conversion Disabled
0D=Aux1 Mono Sub, Aux2 Right Front, Internal CD Enabled/External CD Disabled, Conversion Enabled
My options are already set to 08. Which should work. But still nothing. Yes pin 8 and 20 is the AUX 2 pins according to the wiring diagram.
Give me part number for ACM so I can confirm I'm using the correct file for your asbuilt.
Run Forscan and go to configuration tab up the top, I need the ACM Part Number. Give me the calibration level also.
Start a new vehicle profile, do not use an existing one.
There are a lot of ACM variations so I would not rely on what is found on www for other models and vehicles.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- barendvdw
- Junior Member
- Posts: 6
- Joined: Tue Mar 22, 2022 7:10 am
- Location: South Africa
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink LX
Hi,
So ACM details below.
ACM - Audio Control Module
Part number: EB3T-19C107-DH
Calibration level: EB3T-19C107-DH (latest known: EB3T-19C107-DJA)
Strategy : EB3T-14D099-DF
Calibration: EB3T-14D100-DD
I have done some searching and found a gentleman in Malaysia that claims that certain ACM's do not have a "amplified" center channel ie. (AUX2 pin 8 & 20).
I continued with a temporary workaround and pulled audio signal from the two front speaker channels ( + from right and - from left ) Not true center channel but it does make for a "fuller" sound in the vehicle.
PS. I also have a "EB3T-19C107-DJ" ACM that came from the donor ranger I pulled the SYNC 3 unit out of.
So ACM details below.
ACM - Audio Control Module
Part number: EB3T-19C107-DH
Calibration level: EB3T-19C107-DH (latest known: EB3T-19C107-DJA)
Strategy : EB3T-14D099-DF
Calibration: EB3T-14D100-DD
I have done some searching and found a gentleman in Malaysia that claims that certain ACM's do not have a "amplified" center channel ie. (AUX2 pin 8 & 20).
I continued with a temporary workaround and pulled audio signal from the two front speaker channels ( + from right and - from left ) Not true center channel but it does make for a "fuller" sound in the vehicle.
PS. I also have a "EB3T-19C107-DJ" ACM that came from the donor ranger I pulled the SYNC 3 unit out of.
2018 Ranger Supercab XLS 2.2 Auto
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
barendvdw wrote: ↑Tue May 03, 2022 12:59 am Hi,
So ACM details below.
ACM - Audio Control Module
Part number: EB3T-19C107-DH
Calibration level: EB3T-19C107-DH (latest known: EB3T-19C107-DJA)
Strategy : EB3T-14D099-DF
Calibration: EB3T-14D100-DD
I have done some searching and found a gentleman in Malaysia that claims that certain ACM's do not have a "amplified" center channel ie. (AUX2 pin 8 & 20).
I continued with a temporary workaround and pulled audio signal from the two front speaker channels ( + from right and - from left ) Not true center channel but it does make for a "fuller" sound in the vehicle.
PS. I also have a "EB3T-19C107-DJ" ACM that came from the donor ranger I pulled the SYNC 3 unit out of.
For part number EB3T-19C107-D* your asbuilt is correct. D* means the whole D linage so will assume then that D linage does not contain additional amplifier circuits;
EB3T-19C107-DA
EB3T-19C107-DB
EB3T-19C107-DC
EB3T-19C107-DE
EB3T-19C107-DF
EB3T-19C107-DG
EB3T-19C107-DH
EB3T-19C107-DHA
EB3T-19C107-DJ
EB3T-19C107-DJA
meaning that the hardware options and asbuilt will be identical.
EB3T-19C107-A*, B*, C*, L* OR
JB3T-19C107-A* B* C* F* G* L* M* S* R*
Is basically everything else, do they support your country, I cannot answer that. Do they support centre speaker amp, most likely as some of those models are in an Everest with centre speaker.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- barendvdw
- Junior Member
- Posts: 6
- Joined: Tue Mar 22, 2022 7:10 am
- Location: South Africa
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink LX
That's unfortunate.
So I might try and source a ACM from a totaled Everest then...
Thanks for the information. For now I will use the bridged connection until I can source a ACM from a vehicle I know had the center channel working.
So I might try and source a ACM from a totaled Everest then...
Thanks for the information. For now I will use the bridged connection until I can source a ACM from a vehicle I know had the center channel working.
2018 Ranger Supercab XLS 2.2 Auto
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Titanium would have had centre, not sure about other levels. Doubt trend would though. Never had a need to look into it.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 10
- Joined: Tue Mar 17, 2020 6:17 pm
- Location: Manukau City
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Has thanked: 3 times
- Been thanked: 1 time
I have done it to my Ranger, I put the cd part in from an everest, done the wires sub and cover from everest. no programming. I tried programming the ranger cd but i couldn't figure it out. It works with the everest acm.
Fordboyzz Manukau New Zealand
PX2 XLT - 20" Everest wheels, current mod in progress: Electric Roller lid
PX2 XLT - 20" Everest wheels, current mod in progress: Electric Roller lid
-
- Junior Member
- Posts: 5
- Joined: Fri May 26, 2023 6:06 pm
- Location: AUSTRALIA
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2021
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
Did the ACM module you pulled from the Everest come from a model that didn't have the centre speaker and sub already. (only top spec model came with this standard) I'm trying to work out if any Everest ACM unit will work or if I need to have the top spec Everest ACM
-
- New Member
- Posts: 3
- Joined: Fri Jan 08, 2021 2:51 pm
- Location: Philippines
- Model Of Vehicle: RANGER RAPTOR PX3
- Year Of Vehicle: 2021
- Forscan Dongle Type: ELM327 with switch
- Has thanked: 2 times
I gave up on this a year ago, but now I'm back at it. I have a 2021 Raptor Ranger.
I found this on the Forscan forum which is different from those above and I'm confused all over again. Why couldn't Ford give a premium soundsystem to a premium level truck?
ANC Left Front Mixing (LFM) & ANC Center Front Mixing (CFM)
0=LFM no mixing & CFM no mixing
1=LFM no mixing & CFM power center
2=LFM no mixing & CFM center ANC
3=LFM no mixing & CFM reserved
4=LFM power Amp left & CFM no mixing
5=LFM power Amp left & CFM power center
6=LFM power Amp left & CFM center ANC
7=LFM power Amp left & CFM reserved
8=LFM Aux1 & CFM no mixing
9=LFM Aux1 & CFM power center
A=LFM Aux1 & CFM Center ANC
B=LFM Aux1 & CFM reserved
C=LFM reserved & CFM no mixing
D=LFM reserved & CFM power center
E=LFM reserved & CFM Center ANC
F=LFM reserved & CFM reserved
I found this on the Forscan forum which is different from those above and I'm confused all over again. Why couldn't Ford give a premium soundsystem to a premium level truck?
ANC Left Front Mixing (LFM) & ANC Center Front Mixing (CFM)
0=LFM no mixing & CFM no mixing
1=LFM no mixing & CFM power center
2=LFM no mixing & CFM center ANC
3=LFM no mixing & CFM reserved
4=LFM power Amp left & CFM no mixing
5=LFM power Amp left & CFM power center
6=LFM power Amp left & CFM center ANC
7=LFM power Amp left & CFM reserved
8=LFM Aux1 & CFM no mixing
9=LFM Aux1 & CFM power center
A=LFM Aux1 & CFM Center ANC
B=LFM Aux1 & CFM reserved
C=LFM reserved & CFM no mixing
D=LFM reserved & CFM power center
E=LFM reserved & CFM Center ANC
F=LFM reserved & CFM reserved