Ranger Mods

I do not use parkers with DRLs so have never looked to see if they also dim. Thinking about it, it does make sense that they would.
There is no option to change this behaviour.

MeerKat wrote: ↑Fri May 20, 2022 10:12 pm

Gavinpx2 wrote: ↑Thu May 19, 2022 9:18 pm Hey Meetkat, I’m in a similar situation, I have 2019 raptor headlights in my 2015 px2.. the headlights come with the headlight control module (little silver square box) built into the headlight.. do you need a relay to run it ?

HID lights will need relays to power them and also changes in the bcm with Forscan.

Hi I was wondering if you’re able to show me how you ran the relays for the raptor lights please? I’ve been trying to find relay kits online but it seems impossible to find for the d8s bulb.
Email: [email protected]

Any help is appreciated mate thanks

See an auto electrician. There is no pre made relay kit for these. You are not powering the globes, you are powering the ballast that powers the globe.

saeb wrote: ↑Sun Jun 23, 2024 9:27 am See an auto electrician. There is no pre made relay kit for these. You are not powering the globes, you are powering the ballast that powers the globe.

Sorry to be annoying mate, I’ve already tried taking it to auto elecs and they’ve basically just palmed me off.
Are these ballasts part of the headlight or are they seperate ? There is the osram headlight module underneath the headlight ? Or is a seperate ballast needed for the raptor lights ? Thanks

MeerKat wrote: ↑Fri May 20, 2022 10:12 pm

Gavinpx2 wrote: ↑Thu May 19, 2022 9:18 pm Hey Meetkat, I’m in a similar situation, I have 2019 raptor headlights in my 2015 px2.. the headlights come with the headlight control module (little silver square box) built into the headlight.. do you need a relay to run it ?

HID lights will need relays to power them and also changes in the bcm with Forscan.

Hi mate are you able To show me How you ran the relays on these lights ? Any help appreciated thanks

I never had the HID headlights. I had the LED headlights so no relays were required.

I have only ever suggested that HIDs required relays due to the factory wiring diagrams having them and the fact that if a ballast fails it could send high voltage back to the BCM and destroy it.

Any competent auto electrician that knows what they are doing can convert low beam in the headlights to activate through a relay. There is nothing special or a special way. Then someone will need to make the programming change with Forscan.

zaviar.zahid wrote: ↑Sun Jun 23, 2024 10:23 am

MeerKat wrote: ↑Fri May 20, 2022 10:12 pm

Gavinpx2 wrote: ↑Thu May 19, 2022 9:18 pm Hey Meetkat, I’m in a similar situation, I have 2019 raptor headlights in my 2015 px2.. the headlights come with the headlight control module (little silver square box) built into the headlight.. do you need a relay to run it ?

HID lights will need relays to power them and also changes in the bcm with Forscan.

Hi mate are you able To show me How you ran the relays on these lights ? Any help appreciated thanks

Email me as these forums aren't used anymore.
Should be able to get my email through the console. I added you as a friend.