Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.

Speed Sign - Left hand side cluster display

User avatar
saeb
Site Admin
Site Admin
Posts: 4169
Joined: Wed May 17, 2017 8:50 pm
Location: Seaford VIC
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2015
Forscan Dongle Type: Ford VCM
Has thanked: 295 times
Been thanked: 1063 times

Can multiple people please confirm (Sync2) that on the instrument cluster left hand side when in Nav menu displays the speed sign?

I'm sure it did but now cannot be sure. Worst case I will revert to stock and work back as it may have been a change in Sync.

It's not on my list but I don't want to spend more time if it is not there anymore. It is on the map screen though.

Thanks
Stewart

Ford PX2 Supercab 2015 Automatic
gordo350
Junior Member
Junior Member
Posts: 14
Joined: Mon May 22, 2017 7:44 am
Location: Violet town
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2015
Been thanked: 1 time

Yup. I can confirm it's there
Gordo
2015 PX2 XLT Supercab
Petedirect
New Member
New Member
Posts: 3
Joined: Sat Aug 12, 2017 6:21 pm
Location: Sunshine Coast
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2015
Has thanked: 1 time

Yep its always been there on my screen
2015 Ranger XLT PX2 - TJM Bullbar, Winch, Snorkel
User avatar
saeb
Site Admin
Site Admin
Posts: 4169
Joined: Wed May 17, 2017 8:50 pm
Location: Seaford VIC
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2015
Forscan Dongle Type: Ford VCM
Has thanked: 295 times
Been thanked: 1063 times

Good, good. Thanks all.

Reverted APIM so will see if that is my issue tomorrow.
Stewart

Ford PX2 Supercab 2015 Automatic
User avatar
saeb
Site Admin
Site Admin
Posts: 4169
Joined: Wed May 17, 2017 8:50 pm
Location: Seaford VIC
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2015
Forscan Dongle Type: Ford VCM
Has thanked: 295 times
Been thanked: 1063 times

Sorted. I had speed sign recognition enabled in the cluster and that was why.

No it does not work and will require replace hardware or firmware. If I find either or then I will put a how too.
Stewart

Ford PX2 Supercab 2015 Automatic
rusty-pie
Donator
Donator
Posts: 83
Joined: Mon Jul 03, 2017 8:47 pm
Location: Brisbane
Model Of Vehicle: EVEREST TREND UA
Year Of Vehicle: 2016
Has thanked: 7 times
Been thanked: 4 times

Do you recon that the camera used for the collision warning on the Everest could also work with this?
User avatar
saeb
Site Admin
Site Admin
Posts: 4169
Joined: Wed May 17, 2017 8:50 pm
Location: Seaford VIC
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2015
Forscan Dongle Type: Ford VCM
Has thanked: 295 times
Been thanked: 1063 times

No. Not unless I can get the Firmware.

The Ranger uses the same camera.

It may not even read our crappy signs consistently enough anyway.
Stewart

Ford PX2 Supercab 2015 Automatic
rusty-pie
Donator
Donator
Posts: 83
Joined: Mon Jul 03, 2017 8:47 pm
Location: Brisbane
Model Of Vehicle: EVEREST TREND UA
Year Of Vehicle: 2016
Has thanked: 7 times
Been thanked: 4 times

Cheers, I wasn't sure if the ranger had the camera or not.
User avatar
saeb
Site Admin
Site Admin
Posts: 4169
Joined: Wed May 17, 2017 8:50 pm
Location: Seaford VIC
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2015
Forscan Dongle Type: Ford VCM
Has thanked: 295 times
Been thanked: 1063 times

Tech pack was optional in 2015 - early 2016 then it become standard or more to the fact the dealers stopped ordering less Tech pack.

Cameraless XLT are still out there from the early models though.
Stewart

Ford PX2 Supercab 2015 Automatic