Hi people new to this forum so be kind .
Just looking for info on getting the trans temp codes for doing a custom gauge for a biturbo Everest Sport.
I have an Ultragauge blue.
Apologies if wrong index for this question .
Cheers
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Ultragauge blue
-
- New Member
- Posts: 2
- Joined: Sat Jul 24, 2021 12:13 pm
- Location: Australia
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2020
- Forscan Dongle Type: Other
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Hi
Usually Introductions is the best place to make a first post, but that's OK.
When you have access to the forum there is plenty of info available
For monitoring with your adaptor I suggest reading this for a start.
It's not the same unit as yours but should be similar
https://www.saeb.net/viewtopic.php?f=57&t=1459
Usually Introductions is the best place to make a first post, but that's OK.
When you have access to the forum there is plenty of info available
For monitoring with your adaptor I suggest reading this for a start.
It's not the same unit as yours but should be similar
https://www.saeb.net/viewtopic.php?f=57&t=1459
2018 XLT PX2 in Winning Blue