Not something I need right away, and it's just a thought and not sure if even possible but I like the idea of the new electric roller shutter, I have the standard one now, but wondering how easy it would be to retrofit the new one to the rangers. I figured it might be pricey as you would need new key fobs as well?
Sent from my SM-G935F using Tapatalk
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Electric roller shutter
-
Savage3
- New Member
- Posts: 2
- Joined: Mon Sep 30, 2019 11:41 pm
- Location: Townsville
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
Looking at doing the same.
There is a button mounted in the tray, one in the dash and one in the FOB.
I own a PX2 wildtrak, so I would only expect the tray and dash mount buttons to work - which both would need to be custom wired.
FOB - No idea.
There is a button mounted in the tray, one in the dash and one in the FOB.
I own a PX2 wildtrak, so I would only expect the tray and dash mount buttons to work - which both would need to be custom wired.
FOB - No idea.
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Possibly use Everest Fobs and an Everest rear door module RTGM. Unless the shutter already has the module built in which it may do.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic