Ranger Mods

Does anyone have a Pinout diagram for the drivers door window switch in a px2 2016 model XLT?

Thinking of doing a bit of fiddling but wanted to save having to probe every connection to make a wiremap.

Workshop Manual Power Windows RHD.

Is there a way to program the one touch function of the windows? Do I have to replace the complete windows swith or is there a module missing in my XLS?

It will be window switch based. Rangers do not have modules that control the windows.

Ok, so I have to buy a new window switch, I was looking for it in ebay, but I only found the very same switch I have. Maybe I'm looking for it the wrong way. Since the XLT does have automatic for all windows I suppose my part will be the same as the one that is used in RHD rangers, so maybe someone can give me the part number or a link where to buy the new switch

No Australian built Ranger has automatic on all windows, drivers only, so any part number would still not help you. It's possible that your XLT oer there has door modules for this feature and it is a totally different setup again, module, switch, loom etc..

You could email Redtek and ask about the window module, they may want pictures of the plugs to confirm it will work but it will be your cheapest way.

ok, so you are telling me PX1 didn't have automatic for all windows, since my interior is from PX1 generation. If so, then it's not possible to replace my windows switch to the one coming in my xlt. I really didn't want to remove both door panels, but I guess that's the only way for me to try the retrofit

End result from what I understand is you have a PX2 that uses PX2 electronics but uses PX1 interior plastics, dash etc.

No Ranger, Thai built, Australia delivered ever had this configuration and never cam with auto windows on all windows. Everest yes, Ranger no. The only difference is one runs door modules and one does not. Vehicles with door modules also use different switches witch are LIN based.

I can only recommend you have a look inside your XLT and make a comparison to the XLS then go from there.

so could you put door modules and switches from an Everest into a ranger?
and then forscan mods?

Brett_32i wrote: ↑Tue Aug 20, 2019 2:53 pm so could you put door modules and switches from an Everest into a ranger?
and then forscan mods?

> viewtopic.php?f=3&t=1579&p=5498&hilit=A ... dows#p5498