Wondering if anyone knows how I can edit an XLS 2013 PX1 Ranger to adjust the state of charge it attempts to keep the battery at? Default is 80%, but I'd like to tweak this to either 85 or 90%. I've got Forscan and I've been able to turn smart charge on/off, but ideally want to leave it enabled (With it off, I lose the ability to read the OBD PIDs related to the BMS), but adjust the SOC up a bit.
Cheers,
Joseph
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
PX1 Set BMS State of Charge
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Unless it is listed in the 3rd post here then it cannot be changed. > viewtopic.php?t=1213 <
You could possibly unplug the BMS sensor on the negative battery terminal.
You could possibly unplug the BMS sensor on the negative battery terminal.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic