Hi
I have a 2019 Ranger and have just bought a Ultragauge MX. I initially plugged it into the rear OBD port but it couldn't identify the vehicle's protocol - it never exited scanning mode. I then tried the front OBD port and it worked fine. Is this expected? Anyone esle found this?
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Ultragauge doesn't work in PX3 rear OBD port?
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Hi
Have never heard of one not working in the rear port.
Rear port may faulty but unlikely
When you insert it into the rear port make sure it is squared up and push it in evenly but firm.
It would be very easy to bend a pin
Have never heard of one not working in the rear port.
Rear port may faulty but unlikely
When you insert it into the rear port make sure it is squared up and push it in evenly but firm.
It would be very easy to bend a pin
2018 XLT PX2 in Winning Blue
-
- Junior Member
- Posts: 5
- Joined: Sat Apr 02, 2022 8:46 am
- Location: Adelaide
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
- Has thanked: 3 times
- Been thanked: 1 time
Okay thanks, I’ll try again tomorrow.
2019 XLS Sport (PX3 MY19.75), 3.2 litre, with Ironman bullbar, ARB BASE rack and UltraGauge display.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Front is linked to the rear, rear is the main one and either way there should be no issue. It is common on a PX3 for them not to be picked up, just set (force) the protocol in the tool to CAN in the UG and it will be fine.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 5
- Joined: Sat Apr 02, 2022 8:46 am
- Location: Adelaide
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
- Has thanked: 3 times
- Been thanked: 1 time
I tried it again this morning and it worked. Not sure what happened yesterday, probably operator error!
2019 XLS Sport (PX3 MY19.75), 3.2 litre, with Ironman bullbar, ARB BASE rack and UltraGauge display.
-
- Junior Member
- Posts: 5
- Joined: Sat Apr 02, 2022 8:46 am
- Location: Adelaide
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
- Has thanked: 3 times
- Been thanked: 1 time
The mounting bracket looks good too. Well designed, thanks Stewart.
2019 XLS Sport (PX3 MY19.75), 3.2 litre, with Ironman bullbar, ARB BASE rack and UltraGauge display.
-
- Donator
- Posts: 159
- Joined: Mon Apr 22, 2019 12:02 am
- Location: Canberra
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 14 times
- Been thanked: 39 times
If it wants to play up again, lock the protocol to CAN rather than auto. Mine was playing up until I did this.
Ian B
PX3 XLT 3.2
PX3 XLT 3.2