Hi all
Does anyone have the cutout template for the bumper when fitting ARB summit bar to a Px2 Ranger..
And does anyone know if the fitting instructions for the 3440500 and the 3440510 and 3440530 are essentially the same plus or minus any extra sensors that some rangers have..
Thanks for any info that is provided..
Swa
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
ARB 3440500
-
Swadurden71
- New Member
- Posts: 3
- Joined: Sat Jul 04, 2020 12:45 pm
- Location: Perth
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2016
- Has thanked: 11 times
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Did somewhere but where would be the big question.
I have sent an email off for templates, not sure how I will go. If I receive then will post.
Not sure if I put this one up but... below
I have sent an email off for templates, not sure how I will go. If I receive then will post.
Not sure if I put this one up but... below
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Bumper cut template attached.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic