Hi all, I have a manual PX3 Ranger and I would like to turn off the hill start assist. I find that whilst towing a caravan up hill, this feature makes it very difficult to get going from a complete stop as it applies the caravan brakes as well as the car brakes and the car doesn’t have the grunt to overcome this.
I thought I had this option on the cluster, but I couldn’t find it this morning driving to work. Is there a forscan code to enable this option on the cluster?
Thanks
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Hill start assist
-
diomac
- Junior Member
- Posts: 27
- Joined: Sun May 21, 2017 9:14 pm
- Location: Brisbane
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: OBDlink MX Red Wifi
This should be an option to disable or enable in the driver assist menu on the right hand side of the cluster.
Ford PX2 Wildtrak 2016 Manual
-
CatHerder
- Donator
- Posts: 159
- Joined: Mon Apr 22, 2019 12:02 am
- Location: Canberra
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 14 times
- Been thanked: 39 times
Haven't looked at the HillStart configuration in FORscan, but on VW's you can adjust the hold time.
Ian B
PX3 XLT 3.2
PX3 XLT 3.2
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
- 2020-11-23 .png (123.74 KiB) Viewed 141 times
- 2020-11-23 .png (123.74 KiB) Viewed 141 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic