Does anyone know if it's possible to split the standard reverse camera signal to a second screen?
Is the signal always on, but only selectivly displayed? Or is the camera powered on/off selectivly as dictated by being in reverse gear?
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Splitting the reverse camera signal
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Pretty sure when there is no reverse selected then no lin message sent to camera to turn on. You would just have to check it.
Camera is only an analgue camera so nothing facing. Splice it and send straight to anything with RCA video input.
Camera is only an analgue camera so nothing facing. Splice it and send straight to anything with RCA video input.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic