Hey Guys,
2018 Wildtrack.
Looking at fitting up some additional rear lighting, need to grab feeds for Indicators, Reverse, Brake and Tail Lights, however am worried if i pull from the reverse plug i'll trigger the trailer detection.
Does anyone know a place I can get all of these signals without an issue? (Preferably close by to each other in the looms )
Thanks!
Dan
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Rear light feeds
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Tail light.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 10
- Joined: Tue Feb 06, 2018 7:54 pm
- Location: Melbourne
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: ELS27 Clone
- Been thanked: 1 time
Thanks!!
That's what I was thinking, but was hoping there might be somewhere a little further back in the loom I could grab both indicators.
That's what I was thinking, but was hoping there might be somewhere a little further back in the loom I could grab both indicators.
2018 PX2 Wildtrak
-
- Donator
- Posts: 78
- Joined: Fri Jan 03, 2020 11:49 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 1 time
- Been thanked: 8 times
I'd grab it just before the split to each tail light at the end of the Passenger Side Chassis Rail.
Ranger XLS PX3 MY19.75