I have a 2017 Ambiente Everest. I purchased a set of headlights out of a 2019 Wildtrack. These have HID headlights not Halogen - hence the upgrade. When I plug them in they work fine without the engine running. As soon as I start the car the start to flicker. I have updated the BCM to HID Headlight but it still does it.
I have also purchased the DRL kit from SAEB to get the DRL working.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
HID Headlights
-
- New Member
- Posts: 1
- Joined: Thu Jul 23, 2020 2:52 pm
- Location: Canberra
- Model Of Vehicle: EVEREST AMBIENTE UA
- Year Of Vehicle: 2017
- Forscan Dongle Type: ELM327 with switch
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
HID headlight from the factory have a headlight control module, you do not have this module. You will need to wire them through relays.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Also those headlights use the parkers circuit for DRLs. You will need to cut and splice the new DRL kit to the correct DRL wire on the headlight.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic