Hi guys
what are the best / right fuel pressure PID to monitor?
I want to check fuel pressures in the rail or at the injectors ideally for two reasons
Ensure even pressure across the injectors and pump performance
Check if leaking on HP side when engine running or is off
thanks
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Fuel pressure and temp
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
You have Forscan so check the PIDs (oscilliscope button) for PCM and find what you want regarding fuel. If it exists is will be there, I can then add the appropiate PIDs to the calculator.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 50
- Joined: Mon Oct 15, 2018 8:39 am
- Location: Bairnsdale
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN7
- Been thanked: 4 times
Thanks Will check this out as i sent oil away for analysis and it shows some fuel dilution ;(
Glenn