I really wanted to install a set of Grunt struts, but couldn't find any stocking distributor who would ship to Germany. The next best thing was trusty Amazon. I found lots of offers, but decided to buy the Outbit Gas Pressure Lifters for €29 and free shipping. I ordered them on 6 June and they arrived today, 8 June.
The downside is they are not the same as the Grunt product as they don't allow one-finger lifting of the tailgate, but for the price, I can't really complain much. They definitely make a difference in lowering the tailgate and it is now a hands-off process. The value will be determined by how long they last.
The total installation time was about 25 minutes, but this included laying everything out, picking out the tools, prepping and cleaning the parts, and putting my tools back.
The strut kit came as you see it in this image. The yellow envelope was folded and stuffed into the white envelope. The white envelope was in a large Amazon box with lots of packing paper.
This is the complete kit showing the struts and mounting hardware. As described in the Amazon page, there are no instructions included. Fortunately, there are plenty of examples of how similar struts are mounted and the videos on the Grunt website helped.
Here is the layout showing the tools I used. I printed off a screenshot from a webpage that showed a similar product. I believe in hardware remaining where I put it, so I used blue threadlocker on the four bolts I installed. I had to clean the threads on the four large bolts, as they were covered in light oil or grease. I used some carb and choke cleaner and a paper towel to clean the surfaces so the threadlocker would work. I also removed the ends from the strut shafts, cleaned them, and reassembled them with threadlocker. They were loose and I don't like loose hardware.
I used a 1/2-inch impact wrench and a T50 Torx driver to remove the two bolts on the tailgate. I used a T40 Torx driver on a 3/8-inch ratchet handle to remove the cable bolt on the truck bed. The right side T40 bolt was loose and I easily removed it with my fingers. The left side T40 bolt required the ratchet handle, but I used blue threadlocker on the new bolts.
Here are two images showing the right side strut installed. I had to file the tailgate bracket a bit to remove the burrs created from drilling the hole for the pin.
It might be my imagination, but lifting the tailgate seems to be a bit easier now. However, it does require more than one finger. If I could find the lifting strut, I would replace one of the existing struts, as I am confident the mounting hardware will work for the new strut.
As with most of these kits, it included a small bracket and spring. I assume this is for some applications to help stow the tailgate cable or keep it from interfering with the strut. I didn't find a place to mount the bracket, but I didn't need it since the cable doesn't interfere with the strut.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Generic Tailgate Struts
- GerryP
- Moderator
- Posts: 514
- Joined: Sun May 21, 2017 8:17 pm
- Location: Karoonda SA
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 58 times
- Been thanked: 82 times
Excellent detailed write up. Many thanks for sharing. A great job.
Gerry
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
In the future I would help if I can.
Easy for me to get what you want and post it to you.
The Grunt struts are AU$89, just need freight and done, all too easy.
Easy for me to get what you want and post it to you.
The Grunt struts are AU$89, just need freight and done, all too easy.
2018 XLT PX2 in Winning Blue
- MikeK
- Donator
- Posts: 83
- Joined: Fri Oct 26, 2018 10:00 am
- Location: Gernsheim, Germany
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 5 times
- Been thanked: 9 times
Be careful! I might just take you up on your offer.
I am interested in the unique strut that allows easy closing. I haven't found that strut, but it might be available in Australia.
2018 Wildtrak 3.2L Auto Supercab 4x4 in Pride Orange
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
I will help if I can, no worries.
The Grunt set has the easy up feature.
One strut for down, the other for up.
They work very well, better than the ARB struts.
2018 XLT PX2 in Winning Blue
-
- Donator
- Posts: 25
- Joined: Sun Mar 10, 2019 10:00 am
- Location: Port Pirie
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2019
- Has thanked: 6 times
- Been thanked: 1 time
I seen today the Grunt strut going for $98 but for the easy up and down struts they were $189.
2019 XLT, 2.0ltr, ARB Bullbar, Flexiglass Sports Canopy, ARB Frontier fuel tank,Redarc elec brake, Wildtrac rims, and a little more to come.
-
- Donator
- Posts: 78
- Joined: Fri Jan 03, 2020 11:49 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 1 time
- Been thanked: 8 times
You would be better off getting the spring off the PX3s for the Easy Up. It makes the tailgate even lighter than the struts, can close the tailgate easily with my pinky.
Ranger XLS PX3 MY19.75
-
- New Member
- Posts: 3
- Joined: Thu Dec 30, 2021 8:40 pm
- Location: philippines
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2015
installed one of these generic struts and its been working fine since... i only installed one because two seems too slow for me. its like install and forget. i dont think there's is a strut that "pulls" the tailgate up, because either that would be a negative spring or a vacuum chamber. Rangers i've seen that have those easy up gates use a torsion bar not a strut.
all stock but ready to rock...
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Use Grunt and they will slow down as well as easy up if both struts are installed. I replaced my generics for this reason.roycoy wrote: ↑Fri Dec 31, 2021 2:29 am installed one of these generic struts and its been working fine since... i only installed one because two seems too slow for me. its like install and forget. i dont think there's is a strut that "pulls" the tailgate up, because either that would be a negative spring or a vacuum chamber. Rangers i've seen that have those easy up gates use a torsion bar not a strut.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic