Just installed Option 4WD steel bumper, and now ranger constantly thinks that there is someone in front of me...
I could probably move it a bit to the center where the grill is, but then you can always see the sensor, and that thing is huge and ugly..
Usuall sensitivity settings trough the dash didnt help...
Is there some sort of other calibration possible?
Thanks in advance!
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Collision assistance with steel bumper
-
- Donator
- Posts: 32
- Joined: Wed Jun 27, 2018 12:27 am
- Location: Croatia
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: ELM327 with switch
- Has thanked: 3 times
- Been thanked: 1 time
Fuel 20" -43
Toyos MT 37s
110 mm fenders
OME 2" lift
O4WD 4" lift
O4WD Steel bumper front and back
O4WD rollbar with roofrack
Mustang xenon headlights
LED taillights
50" lightbar
Winch
Stage1 mapping
Toyos MT 37s
110 mm fenders
OME 2" lift
O4WD 4" lift
O4WD Steel bumper front and back
O4WD rollbar with roofrack
Mustang xenon headlights
LED taillights
50" lightbar
Winch
Stage1 mapping
-
- Donator
- Posts: 235
- Joined: Tue Nov 07, 2017 8:46 pm
- Location: Queensand
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2016
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 18 times
- Been thanked: 28 times
I believe the sensitivity/intensity settings are for the steering wheel vibration only.
I can't see how the radar will work unless it has clear line of sight. Mine was obstructed by the number plate surround only a tiny bit and that was enough to make it useless.
I can't see how the radar will work unless it has clear line of sight. Mine was obstructed by the number plate surround only a tiny bit and that was enough to make it useless.
2016 XLT 4x4 Space cab, Aluminium Tray, Ford Steel Bull bar. Rear bumper bar fitted for parking sensors.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Use Forscan to do a CCM calibration and see if this resolves the issue.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic