Ranger Mods

I am on the hunt for some wiring diagrams. I have a 2021 PX3 XLS that I have added come clear view tow mirrors to and some of the features don't work.

My model didn't come with indicators, power fold, heat or puddle lamps however I have managed to get 2 of the 4 working. I have managed to get the heat and power fold working (some wiring was required).

Now I am trying to get the puddle lamps and the indicators working. I have a cheat way of doing it however I feel if I get the wiring diagrams it might save me a lot of time as I feel there is only a few missing links under the dash that I need to find. The drivers side indicator was wired but not the passenger.

All the wiring from the mirrors to the footwell is there however most of it stops there so I just need the correct links from those connectors to the other connectors however I can't find all the info that I am after.

Any help would be awesome.

I have found some info but need a little help deciphering it.

For the left hand indicator it appears to originate from a connector C2280C however no idea where to find it doesn't appear to be on the main overall layout of the connections.
And for the puddle lamps it's from C2280F I just need to be able to locate that connector and then test until I can follow it down the line and fill in the missing link/s.

puma10 wrote: ↑Fri May 12, 2023 8:40 pm I have found some info but need a little help deciphering it.

For the left hand indicator it appears to originate from a connector C2280C however no idea where to find it doesn't appear to be on the main overall layout of the connections.

Mirror Indicator SLD Passenger.png

And for the puddle lamps it's from C2280F I just need to be able to locate that connector and then test until I can follow it down the line and fill in the missing link/s.

Mirror Puddle Lamp SLD.png

All C2280 connectors are on the BCM

Thanks.

Managed to trace them out to C299 that is located in the drivers side footwell. Couple of missing links there that I have wired in and now everything is working.

I just don't get it in the older models ford use to just have 1 harness now they have started stripping out cables just to save a few bucks.

Been a real pain in the ass for me that's for sure.