Hi Stewart
The front parking sensors parts arrived.
I had install the wiring and the sensor ,replace the switch and reprogram the cumptuer,
After that,i lost the symbal on the screen when I doing reverse,(I think i lost rear parking sensors too) also I cannot switch off from the right manual only from the switch
Do you have any idea?
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
front parking sensor
-
- Donator
- Posts: 21
- Joined: Wed May 24, 2017 7:48 pm
- Has thanked: 1 time
- Been thanked: 2 times
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Did you only change programming of the PAM? If yes what happens when you put PAM back to default, does the symbol return?andrew1918 wrote: ↑Wed May 24, 2017 7:54 pm Hi Stewart
The front parking sensors parts arrived.
I had install the wiring and the sensor ,replace the switch and reprogram the computer,
After that,i lost the symbol on the screen when I doing reverse,(I think i lost rear parking sensors too) also I cannot switch off from the right manual only from the switch
Do you have any idea?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 21
- Joined: Wed May 24, 2017 7:48 pm
- Has thanked: 1 time
- Been thanked: 2 times
i using the PAM code you provided
"736-01-01 388D-113A-4F
736-02-01 4403-0900-90
736-03-01 0400-2200-67
736-04-01 0040-200A-AC
736-05-01 1840-0000-AC"
I change back to default the symbol returned and I can switch off the rear parking sensor in the right manual when I doing the reverse .
"736-01-01 388D-113A-4F
736-02-01 4403-0900-90
736-03-01 0400-2200-67
736-04-01 0040-200A-AC
736-05-01 1840-0000-AC"
I change back to default the symbol returned and I can switch off the rear parking sensor in the right manual when I doing the reverse .
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Pretty sure the asbuilt I gave you was off 2017 XLS.andrew1918 wrote: ↑Sat May 27, 2017 5:22 pm i using the PAM code you provided
"736-01-01 388D-113A-4F
736-02-01 4403-0900-90
736-03-01 0400-2200-67
736-04-01 0040-200A-AC
736-05-01 1840-0000-AC"
I change back to default the symbol returned and I can switch off the rear parking sensor in the right manual when I doing the reverse .
I will need to purchase a switch and sensors to look further. Also, even though the wiring is at the BCM for the switch it may not follow all the way through to the switch. I can only test once I buy the parts.
Honestly I don't even need front sensors so it is pretty low on the list while I put the existing dollars towards pitch roll.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 21
- Joined: Wed May 24, 2017 7:48 pm
- Has thanked: 1 time
- Been thanked: 2 times
hisaeb wrote: ↑Sat May 27, 2017 7:02 pmPretty sure the asbuilt I gave you was off 2017 XLS.andrew1918 wrote: ↑Sat May 27, 2017 5:22 pm i using the PAM code you provided
"736-01-01 388D-113A-4F
736-02-01 4403-0900-90
736-03-01 0400-2200-67
736-04-01 0040-200A-AC
736-05-01 1840-0000-AC"
I change back to default the symbol returned and I can switch off the rear parking sensor in the right manual when I doing the reverse .
I will need to purchase a switch and sensors to look further. Also, even though the wiring is at the BCM for the switch it may not follow all the way through to the switch. I can only test once I buy the parts.
Honestly I don't even need front sensors so it is pretty low on the list while I put the existing dollars towards pitch roll.
i will try to this tonight" IPC 720-02-02 3xxx xxxx Enable Front and Rear Park Aid Menu"
"
-
- Donator
- Posts: 21
- Joined: Wed May 24, 2017 7:48 pm
- Has thanked: 1 time
- Been thanked: 2 times
give me your address ,I can post the switch ,wiring and sensors to you.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Will PMandrew1918 wrote:give me your address ,I can post the switch ,wiring and sensors to you.
Sent from my iPad using Tapatalk Pro
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic