Show individual TPMS values on screen
Posted: Mon Oct 16, 2017 9:04 pm
Hi,
Ive seen it on other models but not on a Ranger, is it possible to enable showing all 4 TPMS pressure values on the dash? (ie pic of vehicle on screen with 4 wheels and 4 pressures)
Theres a few videos showing changing the IPC AsBuilt 720-04-01 to x4xx xxx xxxx but not sure what will be required for a Ranger. Factory it was x0xx xxx xxx, i tested x4xx xxx xxx and no luck.
Obviously yes my vehicle has TPMS (2017 PX MK2 Wildtrak) and can view the pressures in forscan.
Also if its possible, to show 'Specified Pressure' were it shows 'Specified 40' for example showing your desired pressure, again seen it set as 720-04-01 to xx8x xxx xxx but not sure what would be required for a Ranger.
Thanks
Ive seen it on other models but not on a Ranger, is it possible to enable showing all 4 TPMS pressure values on the dash? (ie pic of vehicle on screen with 4 wheels and 4 pressures)
Theres a few videos showing changing the IPC AsBuilt 720-04-01 to x4xx xxx xxxx but not sure what will be required for a Ranger. Factory it was x0xx xxx xxx, i tested x4xx xxx xxx and no luck.
Obviously yes my vehicle has TPMS (2017 PX MK2 Wildtrak) and can view the pressures in forscan.
Also if its possible, to show 'Specified Pressure' were it shows 'Specified 40' for example showing your desired pressure, again seen it set as 720-04-01 to xx8x xxx xxx but not sure what would be required for a Ranger.
Thanks