Hi all, great to find this forum with so much information.
I just recently picked up my Sport which I had ordered about 6 months ago.
The wait was annoying but at least it gave me time to do some research into a few changes I wanted to make when it finally became available. I am wanting to install a VSR for a secondary battery in the tub and I did note that I had to have the BMS altered to turn off the smart charging function. I have changed the Charge limit from 80% to 95% through FORScan but are there any other changes I need to make? I also found an option to change from "single battery" to "dual battery with one sensor" in another module but then do I need to install another sensor?
Any help would be appreciated.
Thanks for having me on board.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Greeting
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
I am fairly certain changing to Dual battery mode increases the limit to 100%
A single battery should be fine at 90 to 95% if used regularly, no other changes needed regarding the battery.
A single battery should be fine at 90 to 95% if used regularly, no other changes needed regarding the battery.
2018 XLT PX2 in Winning Blue