Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Tyre pressure
-
- Junior Member
- Posts: 10
- Joined: Thu Jul 01, 2021 4:47 pm
- Location: Hobart
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2020
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 1 time
Hi. I have added the tyre pressure PIDs for my front and rear tyres but I am unable to get any reading I have attached a photo of one pid to show you what I have attempted to do. Any comments to assist please.
- Attachments
-
- Screen shot
- EF862342-5FEA-4D91-B30B-9BBB69720E11.png (857.36 KiB) Viewed 219 times
- Screen shot
- EF862342-5FEA-4D91-B30B-9BBB69720E11.png (857.36 KiB) Viewed 219 times
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Hi
I also use an Obdlink MX Bluetooth without issues.
If the vehicle is or has been stationary for a while the readings may be scrambled
The wheels have to turn to wake up the sensors.
This is my Left Front T P, mine is a Ranger
I also use an Obdlink MX Bluetooth without issues.
If the vehicle is or has been stationary for a while the readings may be scrambled
The wheels have to turn to wake up the sensors.
This is my Left Front T P, mine is a Ranger
2018 XLT PX2 in Winning Blue
-
- Donator
- Posts: 159
- Joined: Mon Apr 22, 2019 12:02 am
- Location: Canberra
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 14 times
- Been thanked: 39 times
Did you install the correct sensors for your vehicle? The sensor model changed about 2018. (There are existing posts about the correct part numbers)
Ian B
PX3 XLT 3.2
PX3 XLT 3.2
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Everest Trend does not have TPMS sensors, hence nothing to display.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 8
- Joined: Mon Aug 22, 2022 6:15 pm
- Location: Adelaide
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2016
- Forscan Dongle Type: Other
Hi Stewart... Yes the Trend doesn't have the sensors in the tyres, but my Torque Pro app shows data from the ECU - like in the minus psi for all wheels, so yeah, it's just "no sensor" nonesense. But does this mean the ECU is capable, and if I fitted the genuine ford sensors, I would be able to view the data on Torque Pro via the ECU?
Cheers!
Cheers!
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Correct.[email protected] wrote: ↑Sun Aug 28, 2022 8:05 pm Hi Stewart... Yes the Trend doesn't have the sensors in the tyres, but my Torque Pro app shows data from the ECU - like in the minus psi for all wheels, so yeah, it's just "no sensor" nonesense. But does this mean the ECU is capable, and if I fitted the genuine ford sensors, I would be able to view the data on Torque Pro via the ECU?
Cheers!
You will need to enable in IPC and BCM non asbuilt and start a training session and train the sensors in.
Training tools are in the store > wp/ <
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic