When the tyre pressures are displayed on a display that shows the actual pressures, does the factory system only work in the pressure range on the tyre placard or will they still work at a higher pressure as I normally run 47/48psi in the rear tyres when towing.
I do not have the sensors yet as I am checking it all out before purchasing the sensors and training tool.
My ranger is a Xls which does not have the tyre monitor system as standard, when I enable it in forscan I get a tpms malfunction warning on the dash,
which indicates that the Xls is capable of reading the factory sensors if they are fitted and enabled.
Tony.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
TPMS display
-
- Donator
- Posts: 48
- Joined: Sun May 21, 2017 11:11 pm
- Location: Illawarra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: ELM327 with switch
- Been thanked: 4 times
Bull bar, winch, uhf and canopy.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
It will show what the current pressure is, placard values do not affect this.
Yes I believe it will work on an XLS. You have the same modules so there is no reason why it shouldn't, I have offered to do it numerous times as a test but no one wanted it done.
Good luck.
Yes I believe it will work on an XLS. You have the same modules so there is no reason why it shouldn't, I have offered to do it numerous times as a test but no one wanted it done.
Good luck.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 3
- Joined: Sun Nov 05, 2017 4:35 am
- Location: South Africa
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2017
- Has thanked: 1 time
I have a '17 Wildtrak PX2 fitted with a TPMS. Can this system show me the pressure in real time on the screen? Or is there a way for me to see the pressure of each wheel?
- Sports
- Donator
- Posts: 57
- Joined: Mon May 22, 2017 8:20 am
- Location: FNQ
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 24 times
- Been thanked: 10 times
You can see real time tyre pressures but you'll need one of the following,
Ultra Guage
Scan Gauge
Torque Pro App ( android )
OBDLink App ( IOS & android )
Forscan lite App ( IOS & android )
There may be others that I have missed.
Ultra Guage
Scan Gauge
Torque Pro App ( android )
OBDLink App ( IOS & android )
Forscan lite App ( IOS & android )
There may be others that I have missed.
Mick
17 PX2 XLT Supercab Manual, Sync3, 2" Lift,Summit Bullbar, Fyrlyt 5000's, ARB 140l Tank, Versus Creed 17x8.5, 285x70x17 KM2, Safari Snorkel, Black Duck Seat Covers, Ozki Canvas Sliding Canopy, Steel Tray, Tint, XRS 370c,100L Water,
17 PX2 XLT Supercab Manual, Sync3, 2" Lift,Summit Bullbar, Fyrlyt 5000's, ARB 140l Tank, Versus Creed 17x8.5, 285x70x17 KM2, Safari Snorkel, Black Duck Seat Covers, Ozki Canvas Sliding Canopy, Steel Tray, Tint, XRS 370c,100L Water,
- Sports
- Donator
- Posts: 57
- Joined: Mon May 22, 2017 8:20 am
- Location: FNQ
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 24 times
- Been thanked: 10 times
Unfortunately not, Ford in their wisdom didn't code that into the grand scheme of things on the Ranger.
So you'll need a OBDlink MX (recommended) and one of the above mentioned.
So you'll need a OBDlink MX (recommended) and one of the above mentioned.
Mick
17 PX2 XLT Supercab Manual, Sync3, 2" Lift,Summit Bullbar, Fyrlyt 5000's, ARB 140l Tank, Versus Creed 17x8.5, 285x70x17 KM2, Safari Snorkel, Black Duck Seat Covers, Ozki Canvas Sliding Canopy, Steel Tray, Tint, XRS 370c,100L Water,
17 PX2 XLT Supercab Manual, Sync3, 2" Lift,Summit Bullbar, Fyrlyt 5000's, ARB 140l Tank, Versus Creed 17x8.5, 285x70x17 KM2, Safari Snorkel, Black Duck Seat Covers, Ozki Canvas Sliding Canopy, Steel Tray, Tint, XRS 370c,100L Water,
-
- Donator
- Posts: 48
- Joined: Sun May 21, 2017 11:11 pm
- Location: Illawarra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: ELM327 with switch
- Been thanked: 4 times
Thanks Stewart,
This is going to be a project for the future.
Tony.
This is going to be a project for the future.
Tony.
Bull bar, winch, uhf and canopy.
-
- Junior Member
- Posts: 7
- Joined: Tue May 01, 2018 7:02 pm
- Location: Bangkok
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
I couldn’t find the PID for TPMS anywhere on the OBDLink iOS app. I’m I missing something? I have the OBDLink MX Wifi. Thanks in advance.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2016 Everest Titanium, DTE Chip, DTE Pedal Box, Nitto Terra Grappler G2, Fox Performance 2.0, Rhino Rack, and Tow Bar
- GerryP
- Moderator
- Posts: 514
- Joined: Sun May 21, 2017 8:17 pm
- Location: Karoonda SA
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 58 times
- Been thanked: 82 times
Hi TANK,
You'll need to construct some user defined PIDS using the following codes mate... I'm not familiar with the iOS version, but these certainly work with android.
Tyre Pressures
LHF
Header: 726
Mode: 22
PID: 2813
Equation: (((256*A)+B)/3+22/3)*0.145
RHF
Header: 726
Mode: 22
PID: 2814
Equation: (((256*A)+B)/3+22/3)*0.145
LHR
Header: 726
Mode: 22
PID: 2816
Equation: (((256*A)+B)/3+22/3)*0.145
RHR
Header: 726
Mode: 22
PID: 2815
Equation: (((256*A)+B)/3+22/3)*0.145
Have a look here if you want some info on how to program in your own PIDS viewtopic.php?f=57&t=1459&p=4462&hilit=OBDLINK#p4462
You'll need to construct some user defined PIDS using the following codes mate... I'm not familiar with the iOS version, but these certainly work with android.
Tyre Pressures
LHF
Header: 726
Mode: 22
PID: 2813
Equation: (((256*A)+B)/3+22/3)*0.145
RHF
Header: 726
Mode: 22
PID: 2814
Equation: (((256*A)+B)/3+22/3)*0.145
LHR
Header: 726
Mode: 22
PID: 2816
Equation: (((256*A)+B)/3+22/3)*0.145
RHR
Header: 726
Mode: 22
PID: 2815
Equation: (((256*A)+B)/3+22/3)*0.145
Have a look here if you want some info on how to program in your own PIDS viewtopic.php?f=57&t=1459&p=4462&hilit=OBDLINK#p4462
Gerry
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Everything is here viewtopic.php?f=57&t=1461 and will work in iOS or Android.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 7
- Joined: Tue May 01, 2018 7:02 pm
- Location: Bangkok
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
Thanks for the instructions. I have created the PID but the reading on the App screen shows 1.5 while on the vehicle screen shows 37psi. How do I make it show psi values instead? Thanks
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
2016 Everest Titanium, DTE Chip, DTE Pedal Box, Nitto Terra Grappler G2, Fox Performance 2.0, Rhino Rack, and Tow Bar
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
In the ap go to Settings/Units and go to the bottom of the page.
At Other have you selected Metric.
Select English for PSI readings.
I have Metric selected but in Units you can go to Pressure and manually select kpa, inhg or psi.
2018 XLT PX2 in Winning Blue
-
- Donator
- Posts: 78
- Joined: Fri Jan 03, 2020 11:49 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 1 time
- Been thanked: 8 times
I'm a bit confused reading this.
Stewarts reply to OP saying that it will show current pressures, but then response to FordmanSA was no.
I'm looking at purchasing a set of wheels which come with TPMS, will I beable to enable the system on my PX3 XLS?
Will it show the current pressures on the screen?
Stewarts reply to OP saying that it will show current pressures, but then response to FordmanSA was no.
I'm looking at purchasing a set of wheels which come with TPMS, will I beable to enable the system on my PX3 XLS?
Will it show the current pressures on the screen?
Ranger XLS PX3 MY19.75
-
- Donator
- Posts: 51
- Joined: Thu Jul 04, 2019 8:19 am
- Location: Thornlie, WA
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Been thanked: 5 times
Earlier models didn't show the actual pressures on one of the dash screens. I think newer models do. You can't get an older model show on dash, but u can use another device to read the info fromvthe OBD port and display it (providing it has the wheel sensors)TieNN89 wrote:I'm a bit confused reading this.
Stewarts reply to OP saying that it will show current pressures, but then response to FordmanSA was no.
I'm looking at purchasing a set of wheels which come with TPMS, will I beable to enable the system on my PX3 XLS?
Will it show the current pressures on the screen?
Regards,
Alan.
===============================
2018 UA Everest Titanium, 3.2l, Shadow Black
Regards
Alan 'Moby' Stuart
========================================
2018 UA Everest Titanium in Shadow Black
Alan 'Moby' Stuart
========================================
2018 UA Everest Titanium in Shadow Black
-
- Donator
- Posts: 78
- Joined: Fri Jan 03, 2020 11:49 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 1 time
- Been thanked: 8 times
Hi Alan,Moby58 wrote: ↑Mon Jun 08, 2020 10:38 amEarlier models didn't show the actual pressures on one of the dash screens. I think newer models do. You can't get an older model show on dash, but u can use another device to read the info fromvthe OBD port and display it (providing it has the wheel sensors)TieNN89 wrote:I'm a bit confused reading this.
Stewarts reply to OP saying that it will show current pressures, but then response to FordmanSA was no.
I'm looking at purchasing a set of wheels which come with TPMS, will I beable to enable the system on my PX3 XLS?
Will it show the current pressures on the screen?
Regards,
Alan.
===============================
2018 UA Everest Titanium, 3.2l, Shadow Black
That was my exact impression, but the OP has a PX2 (assuming profile is correct) and FordmanSA also has a PX2
Ranger XLS PX3 MY19.75
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Send me a PMTieNN89 wrote: ↑Mon Jun 08, 2020 7:34 pmHi Alan,Moby58 wrote: ↑Mon Jun 08, 2020 10:38 amEarlier models didn't show the actual pressures on one of the dash screens. I think newer models do. You can't get an older model show on dash, but u can use another device to read the info fromvthe OBD port and display it (providing it has the wheel sensors)TieNN89 wrote:I'm a bit confused reading this.
Stewarts reply to OP saying that it will show current pressures, but then response to FordmanSA was no.
I'm looking at purchasing a set of wheels which come with TPMS, will I beable to enable the system on my PX3 XLS?
Will it show the current pressures on the screen?
Regards,
Alan.
===============================
2018 UA Everest Titanium, 3.2l, Shadow Black
That was my exact impression, but the OP has a PX2 (assuming profile is correct) and FordmanSA also has a PX2
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 78
- Joined: Fri Jan 03, 2020 11:49 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 1 time
- Been thanked: 8 times
Hi Saeb, I sent you a PM the other night not sure if you saw it.saeb wrote: ↑Tue Jun 09, 2020 10:38 pmSend me a PMTieNN89 wrote: ↑Mon Jun 08, 2020 7:34 pmHi Alan,Moby58 wrote: ↑Mon Jun 08, 2020 10:38 am Earlier models didn't show the actual pressures on one of the dash screens. I think newer models do. You can't get an older model show on dash, but u can use another device to read the info fromvthe OBD port and display it (providing it has the wheel sensors)
Regards,
Alan.
===============================
2018 UA Everest Titanium, 3.2l, Shadow Black
That was my exact impression, but the OP has a PX2 (assuming profile is correct) and FordmanSA also has a PX2
Ranger XLS PX3 MY19.75