Hello all,
Happy New Year.
Very much a newbie but have had Win 10 dongle for a few weeks. Trying to get my head around everything still. A few questions...
Vehicle has TPMS, how do I get pressures to display on cluster?
I have sorted the low voltage issue with the update and have added instant fuel stats. If I save a profile when Forscan opens is that a source to reset everything to previous. Heard that you should save before making any changes. Do you have to save individual modules or can you save whole set up as a backup?
TIA
Thinky
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Tyre pressure display
-
- Junior Member
- Posts: 25
- Joined: Wed Apr 18, 2018 9:15 am
- Location: Sydney
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 1 time
- Been thanked: 3 times
Good questions don’t believe tyre pressures can be displayed has been asked numerous times. But I stand to be corrected
Scott OZ MY17 Ranger Northern Beaches
- MikeK
- Donator
- Posts: 83
- Joined: Fri Oct 26, 2018 10:00 am
- Location: Gernsheim, Germany
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 5 times
- Been thanked: 9 times
I saved the default configuration in case I want to go back to the factory default. Any time I make a change, I will save the current configuration with a different name, such as YYYYMMDD-Ranger-Wildtrak.
2018 Wildtrak 3.2L Auto Supercab 4x4 in Pride Orange
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Pressures can't be displayed that way unfortunately.Thinky wrote: ↑Mon Dec 31, 2018 7:12 pm Hello all,
Happy New Year.
Very much a newbie but have had Win 10 dongle for a few weeks. Trying to get my head around everything still. A few questions...
Vehicle has TPMS, how do I get pressures to display on cluster?
I have sorted the low voltage issue with the update and have added instant fuel stats. If I save a profile when Forscan opens is that a source to reset everything to previous. Heard that you should save before making any changes. Do you have to save individual modules or can you save whole set up as a backup?
TIA
Thinky
You will need an Ultraguage, OBDLink MX or similar to display individual tyre pressures.
Best to backup each module before changes.
I also backup all the modules after a service at my dealers as I don't know if any updates have added/changed anything.
My display looks like this download/file.php?id=614
2018 XLT PX2 in Winning Blue
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I have now confirmed the new cluster firmware is not compatible with pre MY19 clusters so there will not be tyre pressures displayed on the older clusters.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic