Hi Stewart,
Are you able to give me directions to enable the trailer module please?
I can see the module with Forscan but don't know how to enable it, also I don't have the check box to enable/disable sway control in any of my on screen menus.
One other thing do you still have any of the dry pin kits available?
Thanks,
Tony.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Trailer module
-
- Donator
- Posts: 48
- Joined: Sun May 21, 2017 11:11 pm
- Location: Illawarra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: ELM327 with switch
- Been thanked: 4 times
Bull bar, winch, uhf and canopy.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
So you have a genuine Ford trailer module installed?
I assume Ford installed it and added it as a new module with their equipment?
Is it just the sway menus you want?
Just trying to be clear on everything, does everything else work or some things not work?
I assume Ford installed it and added it as a new module with their equipment?
Is it just the sway menus you want?
Just trying to be clear on everything, does everything else work or some things not work?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 48
- Joined: Sun May 21, 2017 11:11 pm
- Location: Illawarra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: ELM327 with switch
- Been thanked: 4 times
The trailer module is a genuine ford module. I installed it and asked the dealer to add it to the system. With a trailer plugged in I get the reverse sensors telling me that I am about to reverse over some thing.
I don't know if the trailer having led lights is not drawing enough current to make the module detect the trailer is the cause of this.
All the trailer lighting was working before it went to the dealer, and are still working the same after I got it back.
Yes I would like the sway menus also.
Tony.
I don't know if the trailer having led lights is not drawing enough current to make the module detect the trailer is the cause of this.
All the trailer lighting was working before it went to the dealer, and are still working the same after I got it back.
Yes I would like the sway menus also.
Tony.
Bull bar, winch, uhf and canopy.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
It's possible the PAM not know it has been installed. I will have a look at some info and get back to you.
Do you have any TRM dtc's? Are you able to view the TRM asbuilt through forscan?
Maybe save your PAM, FDCIM, BCM, IPC and TRM and PM them to me also include your VIN.
Do you have any TRM dtc's? Are you able to view the TRM asbuilt through forscan?
Maybe save your PAM, FDCIM, BCM, IPC and TRM and PM them to me also include your VIN.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 48
- Joined: Sun May 21, 2017 11:11 pm
- Location: Illawarra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: ELM327 with switch
- Been thanked: 4 times
Thanks for your time, I know you are busy, I will try get that information to you in the next couple of days. I work 330pm to 330am. It is not a rush job, I am just one those people that likes things to work properly.
Thanks again,
Tony.
Thanks again,
Tony.
Bull bar, winch, uhf and canopy.
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Just browsing threads and came across this one.
My Everest Titanium has a TRM DTC that Ford says is a "Ghost Code" ie: there's nothing wrong but they can't get rid of it.
I don't recall off the top of my head what the code number is, but the description is "Initial Configuration Not Complete".
I have towed quite a bit and everything works as expected, just this darn code!
There's another "Ghost Code" in both the Driver & Passenger Door modules also, something to do with Switch Illumination.
My OCD would love to get this resolved....
My Everest Titanium has a TRM DTC that Ford says is a "Ghost Code" ie: there's nothing wrong but they can't get rid of it.
I don't recall off the top of my head what the code number is, but the description is "Initial Configuration Not Complete".
I have towed quite a bit and everything works as expected, just this darn code!
There's another "Ghost Code" in both the Driver & Passenger Door modules also, something to do with Switch Illumination.
My OCD would love to get this resolved....
Dennis - 2016 Everest Titanium
-
- Donator
- Posts: 36
- Joined: Wed Jul 26, 2017 8:17 pm
- Location: Broken Hill NSW
- Model Of Vehicle: RANGER XL PX2
- Year Of Vehicle: 2015
- Has thanked: 3 times
- Been thanked: 1 time
I have the same thing for mine.HiroboFreak wrote: ↑Wed Aug 16, 2017 2:30 pm Just browsing threads and came across this one.
My Everest Titanium has a TRM DTC that Ford says is a "Ghost Code" ie: there's nothing wrong but they can't get rid of it.
I don't recall off the top of my head what the code number is, but the description is "Initial Configuration Not Complete"
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
I was tweaking with Forscan today so I snapped some screens....
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
If both of you pm me your saved abt file from Forscan for the TRM module I will have a look. Sometimes that fault is caused by an invalid asbuilt.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Which file?
How do I save it?
Sorry, noob.
Sent from my SM-G930F using Tapatalk
How do I save it?
Sorry, noob.
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
When you look at the asbuilt for the TRM there is a save button down the bottom. I assume you have an extended licence and have looked at the asbuilt code?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Yes I have extended licence so I'll check this out when I get the chance.
Same deal with the door modules? Possible invalid asbuilt?
Same deal with the door modules? Possible invalid asbuilt?
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Rear door switch sounds like a blown globe although they are LED by memory which would seems weird. Check the small light in the rear window switches and see if they are working.
We can compare the asbuilt to another and see what comes up as looking at all the asbuilt options for the door modules brings nothing related to light.
We can compare the asbuilt to another and see what comes up as looking at all the asbuilt options for the door modules brings nothing related to light.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
I have the ab file for my VIN which I downloaded from Motorcraft yesterday.
Will that do?
Sent from my SM-G930F using Tapatalk
Will that do?
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Just PM me the VIN number. Your asbuilt from motor craft may not have the TRM module though as you vehicle was never built with it, hence why I mentioned the saved TRM asbuilt from Forscan.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Dennis you will need to PM your Forscan TRM asbuilt as the data it is not in your factory asbuilt as suspected.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Ok thanks.
I'll do that when I get a chance.
Sent from my SM-G930F using Tapatalk
I'll do that when I get a chance.
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
-
- Donator
- Posts: 48
- Joined: Sun May 21, 2017 11:11 pm
- Location: Illawarra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: ELM327 with switch
- Been thanked: 4 times
Hello Stewart,
I have saved the requested modules and will pm them to you.
There is also a file, Config that has all the modules listed and my vin.
I have an error.
U2100- Initial configuration not complete
Status:
-DTC present at time of request
-Malfunction Indicator lamp is Off or this DTC
Module: Trailer Module
Thanks again for your time and help with this,
Tony.
I have saved the requested modules and will pm them to you.
There is also a file, Config that has all the modules listed and my vin.
I have an error.
U2100- Initial configuration not complete
Status:
-DTC present at time of request
-Malfunction Indicator lamp is Off or this DTC
Module: Trailer Module
Thanks again for your time and help with this,
Tony.
Bull bar, winch, uhf and canopy.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Sorry Tony, I missed part of your post.Tony310864 wrote: ↑Sun Aug 13, 2017 4:58 pm Hi Stewart,
Are you able to give me directions to enable the trailer module please?
I can see the module with Forscan but don't know how to enable it, also I don't have the check box to enable/disable sway control in any of my on screen menus.
One other thing do you still have any of the dry pin kits available?
Thanks,
Tony.
Enable Trailer Sway in IPC is;
720-03-02 xx4x-xx
I will also need you to send me your ABS as built to check if trailer sway is enabled.
On another note. It appears that the TRM asbuilt has zero data even if a factory fitted vehicle.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 48
- Joined: Sun May 21, 2017 11:11 pm
- Location: Illawarra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: ELM327 with switch
- Been thanked: 4 times
Thanks Stewart,
I will send you the ABS as built file over the weekend.
Thanks,
Tony.
I will send you the ABS as built file over the weekend.
Thanks,
Tony.
Bull bar, winch, uhf and canopy.
-
- Donator
- Posts: 11
- Joined: Wed Aug 16, 2017 7:23 am
- Location: Wollongong, NSW
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2017
- Has thanked: 7 times
I have exact codes in mine (everest trend) factory towbar fitted at ford. Maybe they are doing something when installing the towbar . I have a clean forscan backup as well if we need to compare
I'll look over the weekend on ids as well
Cheers
Extra
I'll look over the weekend on ids as well
Cheers
Extra
Stock (for now) 2017 Everest trend
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
There is no asbuilt data in any of these. Everest/Ranger, factory fitted or fitted after factory, the asbuilt is empty.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Speaking with a tech today and it more then certain when the module was installed the programming was not fully completed. There are 2 steps that need to be run and most only do 1.
I will look to get the possible additional step enabled in Forscan but if anyone local wants it cleared then we can test first.
I will look to get the possible additional step enabled in Forscan but if anyone local wants it cleared then we can test first.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
This sounds promising!
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Edited post. Always have errors when I do things on the phone.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic