i have plugged in forscan and had a look around and have noticed in the DTC section it says
Code: b109f- intrusion sensor module
Additional fault symptom:
-component or system operation obstructed or blocked
Status:
Previously set dtc - not present at the time of request
-malfunction indicator lamp is off for this dtc
- test not complete
Module: body control module
Any ideas why is would say this?
Cheers in advance
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Intrusion sensor module dtc
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Mine did the same for about a month, then one day cleared and never come back. I cannot explain why, how, who or where but it's fixed.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- ira11y
- Donator
- Posts: 61
- Joined: Tue Jun 06, 2017 12:47 pm
- Location: Sydney
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2020
- Forscan Dongle Type: ELM327
- Has thanked: 23 times
- Been thanked: 7 times
I may be mistaken but I thought the sensors are located in the overhead light, the little round things on the corners, it could be if you leave your windows open and bugs get in the car they sometimes get trapped in the sensor, after a while they may die and fall out clearing the issue? Just a thought?
To clarify, the alarms is failing trying to set itself as the sensor is not clearing at activation due to the bug obscuring.
To clarify, the alarms is failing trying to set itself as the sensor is not clearing at activation due to the bug obscuring.
Cheers Michael
Opinions are like an anus, everyone has got one
Opinions are like an anus, everyone has got one