hello, can the error P062B be caused by too large intercooler? too low pressure in the inlet?
injectors replaced.
ecu replaced
The wiring harness has been checked.
the error pops up only below 1500 rpm, only while driving.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Fault P062B ford ranger 3.2. 2013
-
- Junior Member
- Posts: 12
- Joined: Tue Aug 03, 2021 5:15 am
- Location: Poland
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2014
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
-
- Donator
- Posts: 159
- Joined: Mon Apr 22, 2019 12:02 am
- Location: Canberra
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 14 times
- Been thanked: 39 times
Looks to be injector control circuit specific. No mention of airflow.
When weird electrical stuff happens check all grounds and power connections are good, especially ground wires connected the engine.
P062B
Description: This DTC sets when the fuel injector energizing time is greater than the permitted energizing time after overrun demand by the driver.
Possible Causes: Aftermarket performance products. PCM programming error
Diagnostic Aids:
Check for sensor and circuit related DTCs. Reprogram or update the calibration. Check for other DTCs
or drive symptoms for further action. Make sure to check for aftermarket performance products before
installing a new PCM.
When weird electrical stuff happens check all grounds and power connections are good, especially ground wires connected the engine.
P062B
Description: This DTC sets when the fuel injector energizing time is greater than the permitted energizing time after overrun demand by the driver.
Possible Causes: Aftermarket performance products. PCM programming error
Diagnostic Aids:
Check for sensor and circuit related DTCs. Reprogram or update the calibration. Check for other DTCs
or drive symptoms for further action. Make sure to check for aftermarket performance products before
installing a new PCM.
Ian B
PX3 XLT 3.2
PX3 XLT 3.2
-
- Junior Member
- Posts: 12
- Joined: Tue Aug 03, 2021 5:15 am
- Location: Poland
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2014
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
injectors are new, not regenerated. I entered a new number. injections for pcm. should I do anything else. How to calibrate the injectors?
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Internal Control Module Fuel Injector Control Performance
Your mileage may vary for some of these items as I have based this on a 2015+
Make sure you have changed the injector id's
Reset pilot injection
Reset high pressure fuel
Look at the 6 character injector id on top of each injector and then compare in Forscan, change if not correct.
Your mileage may vary for some of these items as I have based this on a 2015+
Make sure you have changed the injector id's
Reset pilot injection
Reset high pressure fuel
Look at the 6 character injector id on top of each injector and then compare in Forscan, change if not correct.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 12
- Joined: Tue Aug 03, 2021 5:15 am
- Location: Poland
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2014
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
There is no more info on Ford PTS so you are on your own.
I can only suggest doing a PCM update to the latest calibration and see if it resolves the issue.
I can only suggest doing a PCM update to the latest calibration and see if it resolves the issue.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 12
- Joined: Tue Aug 03, 2021 5:15 am
- Location: Poland
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2014
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
you can tell me what it should be like:
MAP.
MAF.
MAP.
MAF.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Could be anything, see CatHerder's comment for DTC.
Could be fuel pump issue or more likely suction control valve issue that regulates fuel pressure on the back of the high pressure pump. Who knows.
Clear DTC and do some comparisons. Does it only do it at wide open throttle as it look s like you had throttle wide open when the DTC was set?
Could be fuel pump issue or more likely suction control valve issue that regulates fuel pressure on the back of the high pressure pump. Who knows.
Clear DTC and do some comparisons. Does it only do it at wide open throttle as it look s like you had throttle wide open when the DTC was set?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 12
- Joined: Tue Aug 03, 2021 5:15 am
- Location: Poland
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2014
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
the throttle is closed. I don't touch the accelerator .
the error pops up only when the engine speed is less than 1500 rpm.
the error pops up only when the engine speed is less than 1500 rpm.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Does it try and stall?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 12
- Joined: Tue Aug 03, 2021 5:15 am
- Location: Poland
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2014
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
the error only appears at speeds below 1500 rpm.
The engine must be warmed up.
The car moves downhill or straight, but the revolutions do not exceed 1500 rpm.
I can brake or drive at a constant speed.
If the RPM drops below 1500, an error will pop up.
The engine must be warmed up.
The car moves downhill or straight, but the revolutions do not exceed 1500 rpm.
I can brake or drive at a constant speed.
If the RPM drops below 1500, an error will pop up.