Hi All,
I have just removed my tub and had a service body built for my Ranger.
The new lights on the Service Body are LED and the indicator lights in the cab flash really fast like there is a bulb out, but outside are all fine.
I have done a bit of googling and it looks like this can be turned off with ForScan but I am getting conflicting results about which BCM section to change.
I hope someone can point me the right direction.
Thanks
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Indicators in Cab Flashing Fast
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
I would think you may need to put resistors in the indicators.
2018 XLT PX2 in Winning Blue
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
For rears.
726-27-02 xxxx-xxxx-x1xx to xxxx-xxxx-x0xx
726-27-02 xxxx-xxxx-x1xx to xxxx-xxxx-x0xx
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 43
- Joined: Sun May 21, 2017 9:57 pm
- Location: Melbourne
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Has thanked: 15 times
- Been thanked: 2 times
I'm having the fast flash issue with my caravan connected. It doesn't start straight away but after driving for bit, the right indicator starts flashing fast and the left follows shortly after. I've checked 5he trailer plug and everything appears to be fine. The caravan is new with a new 12 pin plug.
2016 PX2 XLT Auto
Stock
Stock
-
- Donator
- Posts: 24
- Joined: Wed May 31, 2017 5:53 pm
- Location: Ballarat, Victoria
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 8 times
- Been thanked: 3 times
I've got exactly the same thing happening when I hook up my new caravan. Didn't with the 2016 vintage Jayco but does hyper flash with the new Crusader Van.Cableguy187 wrote: ↑Sun Jun 20, 2021 11:00 pm I'm having the fast flash issue with my caravan connected. It doesn't start straight away but after driving for bit, the right indicator starts flashing fast and the left follows shortly after. I've checked 5he trailer plug and everything appears to be fine. The caravan is new with a new 12 pin plug.
Had me worried.. Drove a little then it started. Got out to check. Luckily all is working externally on car and van as it should, it's just the fast flash in the car. Car mustn't like the new van's indicators.
2016 PXII Ranger XLT
4x4 Auto Double Cab
in Aluminium. Now with Sync3
4x4 Auto Double Cab
in Aluminium. Now with Sync3