TSB 16-2080 - Effective Jan 6 2017
Posted: Tue May 30, 2017 6:10 pm
TECHNICAL SERVICE BULLETIN
Vehicles Built to 18-Nov-2016 Equipped with a 3.2L Duratorq-TDCi Engine - Combustion Knocking Noise on Cold Start
16-2080
23 December 2016
Model:
Ford
2015-2016 Ranger Build Date: Up to 18-Nov-2016
Engine: 3.2L Duratorq-TDCi (Puma) Diesel
2015-2016 Everest Build Date: Up to 18-Nov-2016
Engine: 3.2L Duratorq-TDCi (Puma) Diesel
Issue: Some 2016 Ranger and Everest vehicles built to 18-Nov-2016 equipped with a 3.2L Duratorq-TDCi engine may exhibit a combustion knocking noise for a few seconds after a cold start only.
Action: Should a vehicle present with the above concern, technicians are advised to follow the Service Instruction below.
Labor Times
Description Operation No. Time
PCM reprogramming 162080A 0.2
Repair/Claim Coding
Causal Part: 12A650
Condition Code: 04
PDR Table
PDR Code Description Time
TSB162080 Connect IDS and Reporgram the Powertrain Control Module (PCM) 0.2
Service Instruction
1. Connect IDS to the vehicle.
2. Reprogram the Powertrain Control Module (PCM) to the latest service calibration using IDS release 103.04 or later. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained from the Professional Technicians Society website – Select Rotunda - Diagnostic Tool Support - IDS Support - Module Reprogramming.
Vehicles Built to 18-Nov-2016 Equipped with a 3.2L Duratorq-TDCi Engine - Combustion Knocking Noise on Cold Start
16-2080
23 December 2016
Model:
Ford
2015-2016 Ranger Build Date: Up to 18-Nov-2016
Engine: 3.2L Duratorq-TDCi (Puma) Diesel
2015-2016 Everest Build Date: Up to 18-Nov-2016
Engine: 3.2L Duratorq-TDCi (Puma) Diesel
Issue: Some 2016 Ranger and Everest vehicles built to 18-Nov-2016 equipped with a 3.2L Duratorq-TDCi engine may exhibit a combustion knocking noise for a few seconds after a cold start only.
Action: Should a vehicle present with the above concern, technicians are advised to follow the Service Instruction below.
Labor Times
Description Operation No. Time
PCM reprogramming 162080A 0.2
Repair/Claim Coding
Causal Part: 12A650
Condition Code: 04
PDR Table
PDR Code Description Time
TSB162080 Connect IDS and Reporgram the Powertrain Control Module (PCM) 0.2
Service Instruction
1. Connect IDS to the vehicle.
2. Reprogram the Powertrain Control Module (PCM) to the latest service calibration using IDS release 103.04 or later. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained from the Professional Technicians Society website – Select Rotunda - Diagnostic Tool Support - IDS Support - Module Reprogramming.