Hi all, I have recently got a 2nd hand 2016 double cab xls with a factory inverter. The light is flashing indicating a fault and I'm struggling to find info on the inverter location and specs. Even my Haynes manual doesn't seem to mention it.
I came across this forum after some googling and have created an account to view the thread I found, hopefully that helps.
I'm interested in seeing if I can trouble shoot or repair/replace.
Cheers
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
New member / Factory inverter info
-
Bala1
- Donator
- Posts: 235
- Joined: Tue Nov 07, 2017 8:46 pm
- Location: Queensand
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2016
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 18 times
- Been thanked: 28 times
I was looking for something else and found info in the inverters.
In short, The flashing light comes on after the inverter has detected a fault, reset 5 times, and the fault has not been rectified.
It should set a DTC so check with Forscan for DTC. There is an extensive test procedure.
In short, The flashing light comes on after the inverter has detected a fault, reset 5 times, and the fault has not been rectified.
It should set a DTC so check with Forscan for DTC. There is an extensive test procedure.
2016 XLT 4x4 Space cab, Aluminium Tray, Ford Steel Bull bar. Rear bumper bar fitted for parking sensors.