Ranger Mods

Hey all

just looking for some help, i have changed the standard headlights (halogen) out on my PX3 2021 XL 4WD Ranger to the 2021 XLT/Wildtrak
(Bi-LED Type) headlights

issue im having is the DRL (LED Strip) is going out after a few minutes or a hour, sometime both headlight DRLs will go out or only one DRL will go out
all other functions of the headlights work 100% correct. low beam, high beam, park light etc and have no issues

i have gone into forscan and looked at all the DRL settings in my PX3 XL and compared these my friends 2021 wildtrak and all the settings were the same, i just changed blub type to LED not halogen

i am getting fault codes for both DRLs when they go out, B124A:11 right side and B124B:11 left side. (Circuit sort to ground), i have checked the headlight wiring pins and locations and the are correct
so i am now starting to wonder if the bright DRL LEDs are drawing to much current and popping the FETS in the BCM.... so maybe the Wildtrak and XLTs have a DRL relay or a different code in the BCM...

Any help or ideas would be great
https://www.saeb.net/download/file.php? ... ew&id=2058

Cheers

As with others in this thread https://www.saeb.net/viewtopic.php?f=22&t=6323 send saved BCM abt.

What circuit are the DRLs using?

Hi there

DRLs are on the factory pins and connectors, wiring. nothing has been changed
40 and 36 from the BCM plug and headlights pins 7 on the headlight connectors
Dedicated DRL circuit

that code is the same in my BCM already
726-26-02 xxxx-xxx0-xxxx

just checked the wildtrak code and its different
726-26-02 XXXX XXX2 xxC

Worth a try?

Cheers

There are 4 types. So you can try from 0 to 4.

Yes looks like MY21.75 is 2 so I'm happy with that.

Also I would change to type 2

726-29-01 to xxxx-xxxx-x2xx

Have adjusted the code to 726-26-02 XXXX XXX2 xxC
All seems to work been for a drive and they didn't fault
Any idea what the difference is between the last letter of the code being XXA or XXC

What is this code changing 726-29-01 xxxx-xxxx-x2xx, mine is x0XX

really appreciate the help
will be donating to the page

Checksum

Both are frequency related. Last change is either DRL or Low Beam frequency. Documents are not clear which is which.

ok so suggest action would be to

XXC back to XXA for 726-26-02

and to change 726-29-01 to xxxx-xxxx-x2xx and test to see the out come?

as again MUCH appreciate the help

Checksum is calculated by Forscan. I is based over the whole block so whatever Forscan put there is correct. Last 2 characters of each line is checksum.

Morning

so i changed 726-29-01 to XXXX-XXXX-X2XX and everything is still running correct and working
code 726-26-02 XXXX XXX2 XXC is the same as it wont let me change XXC back to XXA

Thanks for all your help so stoked she's all good
Cheers

You cannot change the Checksum. Forscan will self calculate and fix it. Ignore the last 2 characters of every line block, they are irrelevant to you.