Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.

Startup Shutdown

User avatar
saeb
Site Admin
Site Admin
Posts: 4169
Joined: Wed May 17, 2017 8:50 pm
Location: Seaford VIC
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2015
Forscan Dongle Type: Ford VCM
Has thanked: 295 times
Been thanked: 1063 times

If you ever have an issue with startup shutdown not working one way or another then do a factory reset.

I recommend a factory reset from new, before programming anyway. If you order the unit pre programmed for Ford CAN you can still have this issue and it may crop up 2 years down the track, the day you install it or never. It can happen even if the modes are set correctly.

Having installed a new one last night after programming on the bench it will not startup but shut down so I have to reset and enter everything again. It is time consuming and a pain.

So factory reset any new unit before programming and check startup/shutdown is working first.
Stewart

Ford PX2 Supercab 2015 Automatic
Top
Cashie
Donator
Donator
Posts: 8
Joined: Mon Dec 28, 2020 11:15 am
Location: Australia
Model Of Vehicle: EVEREST TREND UA
Year Of Vehicle: 2020
Forscan Dongle Type: SAEB Forscan Dongle WIN10
Been thanked: 1 time

What are the recommended settings for the Ranger/Everest for Power On and Power Off?
2020 Ford Everest Sport 3.2
Top
User avatar
saeb
Site Admin
Site Admin
Posts: 4169
Joined: Wed May 17, 2017 8:50 pm
Location: Seaford VIC
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2015
Forscan Dongle Type: Ford VCM
Has thanked: 295 times
Been thanked: 1063 times

I use

Power on - Mode 2
Power off - Mode 0
Stewart

Ford PX2 Supercab 2015 Automatic
Top

Return to “Ultragauge”