G'day all, looking for some answers to this fault code P040C00 EGR TEMP SENSOR A circuit low..I believe the code is hard up but comes and goes on the dash
2015 px2 wildtrak
I have searched but every topic seems to be p040d
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
P040C00 EGR TEMP SENSOR FAULT
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
https://www.saeb.net/viewtopic.php?f=54 ... grt#p15413
Will most likely also apply. Replace sensor as it is the same sensor.
Will most likely also apply. Replace sensor as it is the same sensor.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 3
- Joined: Tue Jan 07, 2020 5:12 pm
- Location: Victoria
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2015
- Has thanked: 1 time
Thanks saeb, I did read that thread and I tested the sensor with a multi meter, it appeared to be ok. Any other ideas
2" lift, GMF bullbar, Fuel rims, stedi spot lights & bar
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Replace the sensor. The error is from the sensor. These last about 3 to 4 years and need replacing either way so for under 100$ from Jefferson it takes the guess work out of the equation.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic