Parts number prefixes will differ depending on the year. Main part number is xxxx-XXXXXX-xx
Part number;
First xxxx is generally year and fixing. - So different case or mounting bracket etc.
Second XXXXXX is the part number.
Last xx is the revision of the unit.
Calibration is generally updatable and is what Ford do when they update a module.
Strategy is basically telling the module what is can and cannot give us in terms of functions etc.
I will update this description to be more human readable over the next few days.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Ford Ranger PX2 stock module list
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 2
- Joined: Fri Jan 19, 2018 4:21 pm
- Location: Melbourne
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
Hi guys new to this so could use a hand. I have a scanguage 2 ( scan tool and preformance manager) off eBay to diagnose on the road any issues. Is this compatible to connect to a laptop to run forscan to adjust the fuel tank and alike. Cheers. ( eBay search scanguage 2 for $235)
Chris Silver 2017 XLT
-
- Donator
- Posts: 19
- Joined: Wed Nov 15, 2017 12:04 pm
- Location: Vic
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Been thanked: 4 times
Probably better asked in the General section , but pretty sure the answer is no. Scanguage is a self contained unit that does not facilitate connection to other devices. ( as far as I know )Chritarr wrote: ↑Sat Jan 20, 2018 12:13 am Hi guys new to this so could use a hand. I have a scanguage 2 ( scan tool and preformance manager) off eBay to diagnose on the road any issues. Is this compatible to connect to a laptop to run forscan to adjust the fuel tank and alike. Cheers. ( eBay search scanguage 2 for $235)
To connect to Forscan on your PC you need either a compatible Bluetooth or WiFi dongle, or hard cabled dongle with USB connector.
Read through the forum particularly the posts by saeb, you will find out what is recommended.
-
- New Member
- Posts: 4
- Joined: Fri Aug 11, 2017 10:35 pm
- Location: Chelsea VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
Hi guys,
Regarding the cruise control radar sensor, i currently have part # EB3T-9G768-AE can i replace with EB3T-9G768-AF then run the cruise control calibration in forscan and all should be good? My current sensor has stopped communicating with error U0104.
Thanks in advance!
Regarding the cruise control radar sensor, i currently have part # EB3T-9G768-AE can i replace with EB3T-9G768-AF then run the cruise control calibration in forscan and all should be good? My current sensor has stopped communicating with error U0104.
Thanks in advance!
Stock 2016 MK2 XLT
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Should be fine. You will need to write the original asbuilt to the new module also unless it is out of the same vehicle.Jleiner wrote: ↑Sun Feb 09, 2020 9:24 pm Hi guys,
Regarding the cruise control radar sensor, i currently have part # EB3T-9G768-AE can i replace with EB3T-9G768-AF then run the cruise control calibration in forscan and all should be good? My current sensor has stopped communicating with error U0104.
Thanks in advance!
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Yep straight forward. You will just load as-built from factory file, if you get stuck, install TeamViewer, give me 2 minutes to fix.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 10
- Joined: Thu May 28, 2020 4:53 pm
- Location: australia
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
Hi team.
im looking to do exactly this, i think i have a dodgy sensor EB3T-9G768-AE.
I first moved the sensor to the right an inch and down an bit (put in a winch plate in the front) it started throwing an error "sensor blocked" then "Pre-Collision assist not available".
Months later...after some 4wding, maybe a rock got up there but its also got a bit of dent in it, the car is throwing up same error. Pre-Collision assist not available. i believe this was prior to the dent in sensor. if i remove the sensor, i get the same error anyway.
Iv located an -AF off ebay for $350 so im thinking of giving it a shot.
im looking to do exactly this, i think i have a dodgy sensor EB3T-9G768-AE.
I first moved the sensor to the right an inch and down an bit (put in a winch plate in the front) it started throwing an error "sensor blocked" then "Pre-Collision assist not available".
Months later...after some 4wding, maybe a rock got up there but its also got a bit of dent in it, the car is throwing up same error. Pre-Collision assist not available. i believe this was prior to the dent in sensor. if i remove the sensor, i get the same error anyway.
Iv located an -AF off ebay for $350 so im thinking of giving it a shot.
Ben N
2017 PX2 Ranger 3.2
2017 PX2 Ranger 3.2
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
AF should be fine.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
You will also need to change the asbuilt in this new unit. So save asbuilt from old module and write to new one as it contains your VIN or write factory asbuilt.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 10
- Joined: Thu May 28, 2020 4:53 pm
- Location: australia
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
Okay great, iv ordered the new unit.
https://www.saeb.net/viewtopic.php?f=12&t=14 - amazing guide. ill use it to get started.
Will this voide any warrenty?
https://www.saeb.net/viewtopic.php?f=12&t=14 - amazing guide. ill use it to get started.
Will this voide any warrenty?
Ben N
2017 PX2 Ranger 3.2
2017 PX2 Ranger 3.2
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
No and no one would not you have replaced it anyway. Possibly start a new thread in electrical or forscan area as you go. As-built will need to be change and CCM calibration will also need to be performed afterwards.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 2
- Joined: Sun Aug 01, 2021 12:31 am
- Location: Perth
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: ELM327 with switch
Morning Everyone, I cant seem to find the PSCM within forscan it seems to be missing from the list. Could someone assist in locating or explaining why this is the case?
PX2 2017 Ranger
TIA
PX2 2017 Ranger
TIA
SOR Perth - Ford Ranger PX2 Wildtrak - Tech Lover - Tinkerer
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Think you may have already contacted me? It will be the adaptor you are using.FlexRanger wrote: ↑Mon Aug 02, 2021 10:36 am Morning Everyone, I cant seem to find the PSCM within forscan it seems to be missing from the list. Could someone assist in locating or explaining why this is the case?
PX2 2017 Ranger
TIA
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic