Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.

PX2 Headlamp switch removal

Goochie
Donator
Donator
Posts: 146
Joined: Sat Jun 23, 2018 11:34 pm
Location: Perth
Model Of Vehicle: RANGER WILDTRAK PX2
Year Of Vehicle: 2018
Forscan Dongle Type: SAEB Forscan Dongle WIN10
Has thanked: 27 times
Been thanked: 24 times

Before I go and snap something, anyone got tips on removal of the headlamp switch?

Or better still, a photo of the rear of the switch?

Thanks.
2018 Ranger Wildtrack (Pride Orange)
User avatar
saeb
Site Admin
Site Admin
Posts: 4169
Joined: Wed May 17, 2017 8:50 pm
Location: Seaford VIC
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2015
Forscan Dongle Type: Ford VCM
Has thanked: 295 times
Been thanked: 1063 times

You are able to see the back by looking up from the BCM area.

Push the to black circles clips in, I cannot remember if there are 2 at the top also but it will start to come out as you will see. Worst case you will have to pop vent trim also.

20190403_203355_resized.jpg
20190403_203355_resized.jpg (636.53 KiB) Viewed 74 times
20190403_203355_resized.jpg
20190403_203355_resized.jpg (636.53 KiB) Viewed 74 times
Stewart

Ford PX2 Supercab 2015 Automatic
Goochie
Donator
Donator
Posts: 146
Joined: Sat Jun 23, 2018 11:34 pm
Location: Perth
Model Of Vehicle: RANGER WILDTRAK PX2
Year Of Vehicle: 2018
Forscan Dongle Type: SAEB Forscan Dongle WIN10
Has thanked: 27 times
Been thanked: 24 times

Thanks for the photos.

Turns out this is really simple and doesn't even require tools. The headlamp switch panel can be easily pulled out by hand, just grab the lower edge of the panel and give it a pull to release the bottom clips, then pull at the right end to release the top right clip, then the top left clip releases easily.
2018 Ranger Wildtrack (Pride Orange)