Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Auto Door Locking + Folding Mirrors PX3
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Auto lock will be in right hand cluster screen, settings/vehicle/locks - auto lock
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 19
- Joined: Tue Nov 05, 2019 9:52 am
- Location: Melbourne
- Model Of Vehicle: RANGER WILDTRAK PX3
- Year Of Vehicle: 2020
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
hi i have a 20.75 wildtrak. Im having trouble with disabling auto start stop. Ive done it from the pcm but in the bcm im getting confuse because its says bms auto start system. Do i switch it off?
- Attachments
-
- 20200913_163605.jpg (5.62 MiB) Viewed 508 times
- 20200913_163605.jpg (5.62 MiB) Viewed 508 times
20.75 PX3 WILDTRAK
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Don't do it in the PCM.
Do it in BCM only. In the filter box up the top type stop and it will show one I have put in that has IPC wording in brackets. Disable that one and that is all. Don't worry about the IPC.
Do it in BCM only. In the filter box up the top type stop and it will show one I have put in that has IPC wording in brackets. Disable that one and that is all. Don't worry about the IPC.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 19
- Joined: Tue Nov 05, 2019 9:52 am
- Location: Melbourne
- Model Of Vehicle: RANGER WILDTRAK PX3
- Year Of Vehicle: 2020
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
My mistake i put pcm instead of ipc in my message. So like in the photo should i disable the ( bms/ auto start stop system,) cheers
20.75 PX3 WILDTRAK
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
That should be fine.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 19
- Joined: Tue Nov 05, 2019 9:52 am
- Location: Melbourne
- Model Of Vehicle: RANGER WILDTRAK PX3
- Year Of Vehicle: 2020
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
Thanks Stewart ill try it out tomorrow and post it for other users. Cheers
20.75 PX3 WILDTRAK
-
- Junior Member
- Posts: 19
- Joined: Tue Nov 05, 2019 9:52 am
- Location: Melbourne
- Model Of Vehicle: RANGER WILDTRAK PX3
- Year Of Vehicle: 2020
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
Thanks Stewart ive done it and it works. Ive noticed the voltage stays at 14.3. Usually it goes down to around 12.5 after a minute after starting the car. Is it coz the bms swiches off with that disabling the auto start stop? And should i change the voltage in the settings?
20.75 PX3 WILDTRAK
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Because you have disable the battery management system which control stop start. Alternator will not turn off now and supply full voltage at all times.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 19
- Joined: Tue Nov 05, 2019 9:52 am
- Location: Melbourne
- Model Of Vehicle: RANGER WILDTRAK PX3
- Year Of Vehicle: 2020
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
should i make any adjustments to the battery settings?
20.75 PX3 WILDTRAK
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I don't believe any other changes will matter. Disabling start stop disable the battery monitoring system.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 2
- Joined: Mon Oct 05, 2020 4:34 pm
- Location: Alice Springs
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2020
I contacted Ford Australia today regaring my PX3 XLS 2020.75 model. Appears it has been removed due to EU regulations. They couldnt tell me any more however this option has been removed, sounds like from the above posts the underlying code has also been removed.....sucks as I was keen to get this going.....
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
What has been removed? Nothing has been removed.petez69 wrote: ↑Mon Oct 05, 2020 4:47 pm I contacted Ford Australia today regaring my PX3 XLS 2020.75 model. Appears it has been removed due to EU regulations. They couldnt tell me any more however this option has been removed, sounds like from the above posts the underlying code has also been removed.....sucks as I was keen to get this going.....
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 2
- Joined: Sun Sep 20, 2020 10:33 pm
- Location: Sydney
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2020
- Forscan Dongle Type: Other
- Been thanked: 1 time
Works like a dream on my 20.75 Trend. Was told by dealer that "this car doesn't have it" - now it does.
Thnx guys!!
Thnx guys!!
-
- New Member
- Posts: 3
- Joined: Mon Jan 18, 2021 1:24 am
- Location: Wroclaw
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2020
- Forscan Dongle Type: ELM327 with switch
- Has thanked: 2 times
Great, I set it up as you wrote and everything works.
you got a cold beer from me.
Ford Ranger 2020 2.0BT
you got a cold beer from me.
Ford Ranger 2020 2.0BT
-
- Junior Member
- Posts: 13
- Joined: Wed Jun 12, 2019 4:52 am
- Location: Detroit
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: ELM327 with switch
- Has thanked: 1 time
- Been thanked: 3 times
In case you want to give your alternator a break, you can plug an LED nightlight or a phone charger into the AC outlet if you have that option on your model. (I'm in the US, and that fully disables Auto Start/Stop without any BCM changes)
-
- Donator
- Posts: 26
- Joined: Tue Apr 14, 2020 7:48 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2020
- Has thanked: 14 times
- Been thanked: 6 times
Hi Stewart,
Thansk for your work and assistance with this. My OBD cable arrived this week and updaed via ForScan today and it worked like a charm!
cheers
Geoff
Thansk for your work and assistance with this. My OBD cable arrived this week and updaed via ForScan today and it worked like a charm!
cheers
Geoff
2020 PX3 Ranger XLT - Outback Armour Adjustable suspension 50mm lift, Parabolic rear springs, ARB Summit Bar, Wildtrack Sail plane and roller shutter, 275/65R18 Cooper ST MAXX
-
- Junior Member
- Posts: 15
- Joined: Thu Dec 17, 2020 1:22 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XL PX
- Year Of Vehicle: 2015
- Forscan Dongle Type: SAEB Forscan Dongle WIN7
- Has thanked: 5 times
- Been thanked: 2 times
Is anyone able to tell me if Auto Door Lock is possible on a PX1? When I ran Forscan for the first time it was already showing as enabled but the system does not function.
Thanks Duncan
Thanks Duncan
2015 PX1 XL Supercab
2017 PX2 XLT Subercab
2017 PX2 XLT Subercab
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Being an XL it would be doubtful.corollavator wrote: ↑Sun Feb 21, 2021 1:42 pm Is anyone able to tell me if Auto Door Lock is possible on a PX1? When I ran Forscan for the first time it was already showing as enabled but the system does not function.
Thanks Duncan
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 2
- Joined: Mon Dec 13, 2021 1:17 pm
- Location: Point Cook
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2021
- Forscan Dongle Type: OBDlink LX
- Been thanked: 1 time
Awesome! been fighting with ford Customer service and the dealer over the user manual having "äutolock", keep getting told not an option.
Plug in this cable, change the codes, and Autolock now available. Everest 2021.75
Thanks Saeb, now to play with other codes...
Plug in this cable, change the codes, and Autolock now available. Everest 2021.75
Thanks Saeb, now to play with other codes...
2021.75 Everest Trend Bi-Turbo 4WD
-
- Donator
- Posts: 15
- Joined: Thu Dec 09, 2021 5:37 am
- Location: Perth
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2021
- Forscan Dongle Type: Other
- Has thanked: 2 times
- Been thanked: 2 times
Is there a non-asbuilt option to do this or must it be done via asbuilt?
21.75 Sport bi-turbo - White - Stock for now
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Never looked. Just use the asbuilt in the last post on the first page. Just do the BCM 726 options, IPC change is not required due to PX3 not having the menu in the cluster anyway.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 15
- Joined: Thu Dec 09, 2021 5:37 am
- Location: Perth
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2021
- Forscan Dongle Type: Other
- Has thanked: 2 times
- Been thanked: 2 times
I've just done it and I have the menu in the cluster on the Everest. I enabled Auto lock in non asbuilt IPC and did the two asbuilt in BdyCM
21.75 Sport bi-turbo - White - Stock for now