After an app update, it stopped working on my GS7.
Fixed it though....
Removed the header field (07E1), which sets it to Auto, and its working again.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Auto Trans Temp
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
You could try just 7E1 not 07E1. It was a bit of a habit writing it this way from when I was monitoring the Can Bus.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
What's a good number to enter for the Transmission Temp high warning?
Sent from my SM-G930F using Tapatalk
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Depends on what temp the oil is good for. Talk to a transmission specialist and find out what a safe high figure is. I doubt you will reach it though.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 7
- Joined: Tue Feb 20, 2018 8:11 pm
- Location: Goulburn
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Been thanked: 1 time
Hi guys,
I have entered the info into Torque, but the gauge is not picking up any data, can anyone point me in the right direction??
Cheers
I have entered the info into Torque, but the gauge is not picking up any data, can anyone point me in the right direction??
Cheers
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Post a screen shot of the custom PID in torque, also what device are you using to connect to the vehicle?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 7
- Joined: Tue Feb 20, 2018 8:11 pm
- Location: Goulburn
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Been thanked: 1 time
Im using an S8 as the device, i have added the DPF % PID and its working well, but i cannot for the life of me get this one working. Here is the screenshots
- Attachments
-
- Screenshot_20180726-153003_Torque.jpg (123.71 KiB) Viewed 352 times
- Screenshot_20180726-153003_Torque.jpg (123.71 KiB) Viewed 352 times
-
- Screenshot_20180726-152955_Torque.jpg (113.43 KiB) Viewed 352 times
- Screenshot_20180726-152955_Torque.jpg (113.43 KiB) Viewed 352 times
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
For kicks try 7E1 instead of 07E1.
Also I am assuming you have an auto and not a manual?
Manuals do not have a transmission fluid temperature sensor. Hence name of PID.
Also I am assuming you have an auto and not a manual?
Manuals do not have a transmission fluid temperature sensor. Hence name of PID.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 7
- Joined: Tue Feb 20, 2018 8:11 pm
- Location: Goulburn
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Been thanked: 1 time
Yes mate, its an Auto.
I have tried with the 0 and without, i have also restarted the phone, then deleted the current gauge and set it up under a new PID as well.
I must be doing something silly if its not working, just cant figure out what that may be
Cheers
I have tried with the 0 and without, i have also restarted the phone, then deleted the current gauge and set it up under a new PID as well.
I must be doing something silly if its not working, just cant figure out what that may be
Cheers
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Try the OBD link app and see if the PID works with that.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 7
- Joined: Tue Feb 20, 2018 8:11 pm
- Location: Goulburn
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Been thanked: 1 time
OK, so my current Bluetooth adapter didn't work with ODB link, so i purchased a new adapter. Tried ODB link and it works, so i thought for sh@#ts and giggles i would try torque again, it now works, so it must have been my adapter.
Thanks for the help guys
Thanks for the help guys
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
What adaptor did you have before? I assume it wasn't an OBDlink.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 3
- Joined: Mon Sep 03, 2018 11:53 pm
- Location: Melbourne
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
Gday,
I have the Ultraguage MX 1.3 for my PX2 Ranger. The Trans Temp is showing b/w 144-150 during normal driving. Can some advise the programming for this unit. Thanks!
I have the Ultraguage MX 1.3 for my PX2 Ranger. The Trans Temp is showing b/w 144-150 during normal driving. Can some advise the programming for this unit. Thanks!
Livin the dream ......
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I think you already have it sorted now but some of the most common UG codes are here viewtopic.php?f=19&t=58
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 10
- Joined: Sat Sep 15, 2018 11:57 am
- Location: Qld
- Model Of Vehicle: RANGER WILDTRAK PX
- Year Of Vehicle: 2015
I have been playing with this since 2015 mine TFT reads 97c not towing and about 106 towing
On a 34 c day
after about 20 km towing
I had the isue of it not working on my samsun tab but fine on s160 androuid
It seam i never named the custom pid after i edited it i was fine
On a 34 c day
after about 20 km towing
I had the isue of it not working on my samsun tab but fine on s160 androuid
It seam i never named the custom pid after i edited it i was fine
-
- Donator
- Posts: 25
- Joined: Mon Apr 15, 2019 4:00 pm
- Location: Melbourne
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
So I put the ODBlink MX in and ended up using Torque application on my phone. Pretty cool really, monitoring temps, tyre pressures and DPF. Had to grab a couple of PID from here so thanks for the information. Had to play to get the tyres monitored on the right wheel after a recent rotation but nothing major. Decided not to try and get a reset device.
2018 XLT. Koni/Bilstein shocks , SSA modified rear springs, ended up with about 30-40mm lift on rear, set the fronts to about a 15mm lift.
-
- Junior Member
- Posts: 10
- Joined: Sun Feb 16, 2020 1:33 pm
- Location: Perth
- Model Of Vehicle: RANGER XL PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: ELM327 Bluetooth
- Been thanked: 1 time
Guys,
I cannot get this working either.
Everything else seems to work except the ATF, the one thing I bought it for.
Tried a heap of different calcs but I don't get anything, not even the little green dot next to the name in the gauge.
Not sure the settings are all saving in the PID Editor.
I did see some message about storage space on the phone but there's not much on it as it's never been used.
Paul
I cannot get this working either.
Everything else seems to work except the ATF, the one thing I bought it for.
Tried a heap of different calcs but I don't get anything, not even the little green dot next to the name in the gauge.
Not sure the settings are all saving in the PID Editor.
I did see some message about storage space on the phone but there's not much on it as it's never been used.
Paul
Cheers Paul.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Can only suggest you post pictures of your settings for that particular PID or if not contact the developer for help being you paid for it.Paul Kelf wrote: ↑Mon Feb 17, 2020 10:19 pm Guys,
I cannot get this working either.
Everything else seems to work except the ATF, the one thing I bought it for.
Tried a heap of different calcs but I don't get anything, not even the little green dot next to the name in the gauge.
Not sure the settings are all saving in the PID Editor.
I did see some message about storage space on the phone but there's not much on it as it's never been used.
Paul
If other settings are wrong, changing calcs will not achieve anything. You could put "A" in calc and still read data from that PID although the output would make no sense.
Does it read misc engine parameters ok? If yes then I come back to how the PID is entered.
Try 7E1 rather than 07E1 and see if that resolves it.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 10
- Joined: Sun Feb 16, 2020 1:33 pm
- Location: Perth
- Model Of Vehicle: RANGER XL PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: ELM327 Bluetooth
- Been thanked: 1 time
Thanks Stewart,
I will try that & keep persisting.
I might try my good phone but not sure how to get the Torque Pro app on it without purchasing again.
I will try that & keep persisting.
I might try my good phone but not sure how to get the Torque Pro app on it without purchasing again.
Cheers Paul.
-
- Donator
- Posts: 159
- Joined: Mon Apr 22, 2019 12:02 am
- Location: Canberra
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 14 times
- Been thanked: 39 times
I did some 'testing' (filling in time while in the passenger seat) the other day day with TFT and thought I would share my findings using TORQUE and an OBD MX+ dongle.
1. When using TORQUE and Custom PIDs, scroll to the bottom of the Custom PID screen and select TEST. This will show the logged 'A' and 'B' values and the calculated result. This is useful if you have issues (I had issues..) and confirms you entered the details correctly.
2. Using the correct TORQUE calculation for TFT {((A*256)+B)*10/160} shown at https://www.saeb.net/viewtopic.php?f=13&t=2667 gave a value of "-0.16667". I traced this to an interaction issue between the OBD MX+ and the cars module. Fixing was achieved by Turning car off-on and could also be fixed by changing formula to ((signed(A)*256)+B)*10/160.
3. I confirmed that an alternative and often seen TFT formula shared for the Ranger is wrong - ((A*256)+B)*5/72-17. Do not use it. It will give a TFT temperature that is about 6C cooler than the correct TFT. (I suspect it is a faulty conversion from from USA modules that output TFT in fahrenheit)
4. ((A*256)+B)*10/160 is the same as ((A*256)+B)/16 if you want to save some typing.
hth someone someday.
1. When using TORQUE and Custom PIDs, scroll to the bottom of the Custom PID screen and select TEST. This will show the logged 'A' and 'B' values and the calculated result. This is useful if you have issues (I had issues..) and confirms you entered the details correctly.
2. Using the correct TORQUE calculation for TFT {((A*256)+B)*10/160} shown at https://www.saeb.net/viewtopic.php?f=13&t=2667 gave a value of "-0.16667". I traced this to an interaction issue between the OBD MX+ and the cars module. Fixing was achieved by Turning car off-on and could also be fixed by changing formula to ((signed(A)*256)+B)*10/160.
3. I confirmed that an alternative and often seen TFT formula shared for the Ranger is wrong - ((A*256)+B)*5/72-17. Do not use it. It will give a TFT temperature that is about 6C cooler than the correct TFT. (I suspect it is a faulty conversion from from USA modules that output TFT in fahrenheit)
4. ((A*256)+B)*10/160 is the same as ((A*256)+B)/16 if you want to save some typing.
hth someone someday.
Ian B
PX3 XLT 3.2
PX3 XLT 3.2
-
- New Member
- Posts: 2
- Joined: Tue Mar 09, 2021 8:38 pm
- Location: Hunter Valley
- Model Of Vehicle: RANGER WILDTRAK PX
- Year Of Vehicle: 2013
- Forscan Dongle Type: ELM327
Hello all, what is the best OBD2 scanner to buy to use with the Torque Pro? I have the Mini Auto Car V2.1 ELM327 OBD2 and tried so many equations and still cant get atf temp to work. Phone is Samsung S9 and Vehicle is 13 Wildtrak.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
OBD MX+ dongle
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic