Hi
I'm very new to this gauge but I had a early model ultragauge which did not show transmission temp and it worked realy well.
I bought a new mx 1.3 pre programmed for the Ranger, bt50 yesterday and could not get the trans temp to work properly the trn1 gave err
and the trn2 gave a reading of 2450 deg. F. After searching on newranger.net and here been able to get the trn temp to work. Thanks Stewart for the info. I was confused because the setting you posted on Newranger are different to the ones you have posted here.
x 0005 /0048 + FFEE (Newranger) and the one here is x 000A / 0010 + 0000 . FFEE gave me a realistic reading where as 0000 gave me a ready of 135 deg C after just starting the engine first thing in morning.
The other problem i seem to have is that it appears that none of the pre programmed mgauges seem to work they all give err on screen is this normal or have a i got a dodgy ultragauge.
PS In the short time i have been on this site i have found some very interesting information thanks Stewart
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Ultragauge mx 1.3
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Check you code.
TDATA: 07E1221E1C0000
TCTRL: 93 RCTRL: 31
RPOS: 2010 MTCH: 621E1C
X: 000A /: 0010 +:0000
OUT: 05 AVE: 00 -------------- Did you change OUT to 05?
L/R: 32
The above is correct and anything older is wrong. Correct codes are here viewtopic.php?f=19&t=58
Ultragauge never comes pre programmed for a Ranger etc. Most if not all of the default mGauges will work with a Ranger. They are generic for Ford CAN. Use the mgauges in the above link.
TDATA: 07E1221E1C0000
TCTRL: 93 RCTRL: 31
RPOS: 2010 MTCH: 621E1C
X: 000A /: 0010 +:0000
OUT: 05 AVE: 00 -------------- Did you change OUT to 05?
L/R: 32
The above is correct and anything older is wrong. Correct codes are here viewtopic.php?f=19&t=58
Ultragauge never comes pre programmed for a Ranger etc. Most if not all of the default mGauges will work with a Ranger. They are generic for Ford CAN. Use the mgauges in the above link.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
The UltraGauge MX is provided pre-programmed with 8 common manufacturer parameters for various vehicles. There is no guarantee that all the pre-programmed parameters will work with your year, make and model vehicle. Those that are not supported by your vehicle will show “Err:.
2018 XLT PX2 in Winning Blue
-
- New Member
- Posts: 3
- Joined: Mon Sep 03, 2018 11:53 pm
- Location: Melbourne
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
I had the same issue. Just bought the guage, I have a PX2 Ranger. My reading initially showed over 2000, then had the shop i brought it off have a look, its now showing 144-150deg when normal driving.
Livin the dream ......