I added the TPMS gauges identified in the Ultragauge Mgauge Listings thread and want to change the values from PSI to Bar. In Germany, all Tyre pressures and gauges are in Bars, not PSI.
What is the output of the data call for the Tyre pressure? From the math function, it appears the value is being divided by two before being displayed. Normally, the PSI is divided by 14.504 to give the Bar equivalent. If I understand what I'm reading in the code, the output must be divided by 29 (really 29.008) and the L/R value set to 12 to display the Tyre pressure as X.XX Bar. The hex value for decimal 29 is 001D.
If I am correct, this should be the change in each of the Tyre pressure gauge settings to display the output in Bar:
X: 0001 /: 001D +: 0000
OUT: 05 AVE: 00
L/R: 12
It's too late tonight to make and test any changes, but please let me know if this is correct. If not, what are the correct changes?
I also noticed some strange behavior in the Tyre pressure displays on the UG. Either my Flaig Tyre pressure gauge is worth the money and my skills at filling the Tyres are fantastic, or there is something wrong with the gauge program. When I configured the gauge settings last night, and tested the UG on my cold truck, each of the Tyre pressure readings was 35.65 PSI. I had each Tyre filled to 2.4 Bar a few weeks earlier, but think it's a bit of a stretch to think I could have filled each Tyre to the same amount. If the rain stops tomorrow, I'll intentionally change the pressure in each Tyre to different values to see if the UG follows.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Output Value for TPMS - PSI to Bar
- MikeK
- Donator
- Posts: 83
- Joined: Fri Oct 26, 2018 10:00 am
- Location: Gernsheim, Germany
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 5 times
- Been thanked: 9 times
Last edited by MikeK on Thu Dec 06, 2018 8:34 am, edited 1 time in total.
2018 Wildtrak 3.2L Auto Supercab 4x4 in Pride Orange
- MikeK
- Donator
- Posts: 83
- Joined: Fri Oct 26, 2018 10:00 am
- Location: Gernsheim, Germany
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 5 times
- Been thanked: 9 times
I can confirm the values in my original post are correct for my truck. The problems I observed yesterday were because my truck had not moved in several hours before I changed the settings. Apparently, the wheels have to turn for a while in order for the sensors to wake up and start transmitting information. I increased the pressure in each Tyre to 2.6 Bar, and the readings are between 2.59 and 2.61.
2018 Wildtrak 3.2L Auto Supercab 4x4 in Pride Orange
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Good work Mike!!MikeK wrote: ↑Thu Dec 06, 2018 8:26 am I can confirm the values in my original post are correct for my truck. The problems I observed yesterday were because my truck had not moved in several hours before I changed the settings. Apparently, the wheels have to turn for a while in order for the sensors to wake up and start transmitting information. I increased the pressure in each Tyre to 2.6 Bar, and the readings are between 2.59 and 2.61.
Yes they will go to sleep after approx 10min of no rotation to save on battery usage.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic